zfs-builds-mm/zfs-0.8.0/lib/libzfs/libzfs_status.c
2019-07-06 23:40:11 +02:00

442 lines
12 KiB
C

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2012 by Delphix. All rights reserved.
* Copyright (c) 2013 Steven Hartland. All rights reserved.
*/
/*
* This file contains the functions which analyze the status of a pool. This
* include both the status of an active pool, as well as the status exported
* pools. Returns one of the ZPOOL_STATUS_* defines describing the status of
* the pool. This status is independent (to a certain degree) from the state of
* the pool. A pool's state describes only whether or not it is capable of
* providing the necessary fault tolerance for data. The status describes the
* overall status of devices. A pool that is online can still have a device
* that is experiencing errors.
*
* Only a subset of the possible faults can be detected using 'zpool status',
* and not all possible errors correspond to a FMA message ID. The explanation
* is left up to the caller, depending on whether it is a live pool or an
* import.
*/
#include <libzfs.h>
#include <libzutil.h>
#include <string.h>
#include <unistd.h>
#include <sys/systeminfo.h>
#include "libzfs_impl.h"
#include "zfeature_common.h"
/*
* Message ID table. This must be kept in sync with the ZPOOL_STATUS_* defines
* in include/libzfs.h. Note that there are some status results which go past
* the end of this table, and hence have no associated message ID.
*/
static char *zfs_msgid_table[] = {
"ZFS-8000-14", /* ZPOOL_STATUS_CORRUPT_CACHE */
"ZFS-8000-2Q", /* ZPOOL_STATUS_MISSING_DEV_R */
"ZFS-8000-3C", /* ZPOOL_STATUS_MISSING_DEV_NR */
"ZFS-8000-4J", /* ZPOOL_STATUS_CORRUPT_LABEL_R */
"ZFS-8000-5E", /* ZPOOL_STATUS_CORRUPT_LABEL_NR */
"ZFS-8000-6X", /* ZPOOL_STATUS_BAD_GUID_SUM */
"ZFS-8000-72", /* ZPOOL_STATUS_CORRUPT_POOL */
"ZFS-8000-8A", /* ZPOOL_STATUS_CORRUPT_DATA */
"ZFS-8000-9P", /* ZPOOL_STATUS_FAILING_DEV */
"ZFS-8000-A5", /* ZPOOL_STATUS_VERSION_NEWER */
"ZFS-8000-EY", /* ZPOOL_STATUS_HOSTID_MISMATCH */
"ZFS-8000-EY", /* ZPOOL_STATUS_HOSTID_ACTIVE */
"ZFS-8000-EY", /* ZPOOL_STATUS_HOSTID_REQUIRED */
"ZFS-8000-HC", /* ZPOOL_STATUS_IO_FAILURE_WAIT */
"ZFS-8000-JQ", /* ZPOOL_STATUS_IO_FAILURE_CONTINUE */
"ZFS-8000-MM", /* ZPOOL_STATUS_IO_FAILURE_MMP */
"ZFS-8000-K4", /* ZPOOL_STATUS_BAD_LOG */
"ZFS-8000-ER", /* ZPOOL_STATUS_ERRATA */
/*
* The following results have no message ID.
* ZPOOL_STATUS_UNSUP_FEAT_READ
* ZPOOL_STATUS_UNSUP_FEAT_WRITE
* ZPOOL_STATUS_FAULTED_DEV_R
* ZPOOL_STATUS_FAULTED_DEV_NR
* ZPOOL_STATUS_VERSION_OLDER
* ZPOOL_STATUS_FEAT_DISABLED
* ZPOOL_STATUS_RESILVERING
* ZPOOL_STATUS_OFFLINE_DEV
* ZPOOL_STATUS_REMOVED_DEV
* ZPOOL_STATUS_OK
*/
};
#define NMSGID (sizeof (zfs_msgid_table) / sizeof (zfs_msgid_table[0]))
/* ARGSUSED */
static int
vdev_missing(uint64_t state, uint64_t aux, uint64_t errs)
{
return (state == VDEV_STATE_CANT_OPEN &&
aux == VDEV_AUX_OPEN_FAILED);
}
/* ARGSUSED */
static int
vdev_faulted(uint64_t state, uint64_t aux, uint64_t errs)
{
return (state == VDEV_STATE_FAULTED);
}
/* ARGSUSED */
static int
vdev_errors(uint64_t state, uint64_t aux, uint64_t errs)
{
return (state == VDEV_STATE_DEGRADED || errs != 0);
}
/* ARGSUSED */
static int
vdev_broken(uint64_t state, uint64_t aux, uint64_t errs)
{
return (state == VDEV_STATE_CANT_OPEN);
}
/* ARGSUSED */
static int
vdev_offlined(uint64_t state, uint64_t aux, uint64_t errs)
{
return (state == VDEV_STATE_OFFLINE);
}
/* ARGSUSED */
static int
vdev_removed(uint64_t state, uint64_t aux, uint64_t errs)
{
return (state == VDEV_STATE_REMOVED);
}
/*
* Detect if any leaf devices that have seen errors or could not be opened.
*/
static boolean_t
find_vdev_problem(nvlist_t *vdev, int (*func)(uint64_t, uint64_t, uint64_t))
{
nvlist_t **child;
vdev_stat_t *vs;
uint_t c, children;
char *type;
/*
* Ignore problems within a 'replacing' vdev, since we're presumably in
* the process of repairing any such errors, and don't want to call them
* out again. We'll pick up the fact that a resilver is happening
* later.
*/
verify(nvlist_lookup_string(vdev, ZPOOL_CONFIG_TYPE, &type) == 0);
if (strcmp(type, VDEV_TYPE_REPLACING) == 0)
return (B_FALSE);
if (nvlist_lookup_nvlist_array(vdev, ZPOOL_CONFIG_CHILDREN, &child,
&children) == 0) {
for (c = 0; c < children; c++)
if (find_vdev_problem(child[c], func))
return (B_TRUE);
} else {
verify(nvlist_lookup_uint64_array(vdev, ZPOOL_CONFIG_VDEV_STATS,
(uint64_t **)&vs, &c) == 0);
if (func(vs->vs_state, vs->vs_aux,
vs->vs_read_errors +
vs->vs_write_errors +
vs->vs_checksum_errors))
return (B_TRUE);
}
/*
* Check any L2 cache devs
*/
if (nvlist_lookup_nvlist_array(vdev, ZPOOL_CONFIG_L2CACHE, &child,
&children) == 0) {
for (c = 0; c < children; c++)
if (find_vdev_problem(child[c], func))
return (B_TRUE);
}
return (B_FALSE);
}
/*
* Active pool health status.
*
* To determine the status for a pool, we make several passes over the config,
* picking the most egregious error we find. In order of importance, we do the
* following:
*
* - Check for a complete and valid configuration
* - Look for any faulted or missing devices in a non-replicated config
* - Check for any data errors
* - Check for any faulted or missing devices in a replicated config
* - Look for any devices showing errors
* - Check for any resilvering devices
*
* There can obviously be multiple errors within a single pool, so this routine
* only picks the most damaging of all the current errors to report.
*/
static zpool_status_t
check_status(nvlist_t *config, boolean_t isimport, zpool_errata_t *erratap)
{
nvlist_t *nvroot;
vdev_stat_t *vs;
pool_scan_stat_t *ps = NULL;
uint_t vsc, psc;
uint64_t nerr;
uint64_t version;
uint64_t stateval;
uint64_t suspended;
uint64_t hostid = 0;
uint64_t errata = 0;
unsigned long system_hostid = get_system_hostid();
verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION,
&version) == 0);
verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE,
&nvroot) == 0);
verify(nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_VDEV_STATS,
(uint64_t **)&vs, &vsc) == 0);
verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_STATE,
&stateval) == 0);
/*
* Currently resilvering a vdev
*/
(void) nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_SCAN_STATS,
(uint64_t **)&ps, &psc);
if (ps != NULL && ps->pss_func == POOL_SCAN_RESILVER &&
ps->pss_state == DSS_SCANNING)
return (ZPOOL_STATUS_RESILVERING);
/*
* The multihost property is set and the pool may be active.
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
vs->vs_aux == VDEV_AUX_ACTIVE) {
mmp_state_t mmp_state;
nvlist_t *nvinfo;
nvinfo = fnvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO);
mmp_state = fnvlist_lookup_uint64(nvinfo,
ZPOOL_CONFIG_MMP_STATE);
if (mmp_state == MMP_STATE_ACTIVE)
return (ZPOOL_STATUS_HOSTID_ACTIVE);
else if (mmp_state == MMP_STATE_NO_HOSTID)
return (ZPOOL_STATUS_HOSTID_REQUIRED);
else
return (ZPOOL_STATUS_HOSTID_MISMATCH);
}
/*
* Pool last accessed by another system.
*/
(void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_HOSTID, &hostid);
if (hostid != 0 && (unsigned long)hostid != system_hostid &&
stateval == POOL_STATE_ACTIVE)
return (ZPOOL_STATUS_HOSTID_MISMATCH);
/*
* Newer on-disk version.
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
vs->vs_aux == VDEV_AUX_VERSION_NEWER)
return (ZPOOL_STATUS_VERSION_NEWER);
/*
* Unsupported feature(s).
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
vs->vs_aux == VDEV_AUX_UNSUP_FEAT) {
nvlist_t *nvinfo;
verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO,
&nvinfo) == 0);
if (nvlist_exists(nvinfo, ZPOOL_CONFIG_CAN_RDONLY))
return (ZPOOL_STATUS_UNSUP_FEAT_WRITE);
return (ZPOOL_STATUS_UNSUP_FEAT_READ);
}
/*
* Check that the config is complete.
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
vs->vs_aux == VDEV_AUX_BAD_GUID_SUM)
return (ZPOOL_STATUS_BAD_GUID_SUM);
/*
* Check whether the pool has suspended.
*/
if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_SUSPENDED,
&suspended) == 0) {
uint64_t reason;
if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_SUSPENDED_REASON,
&reason) == 0 && reason == ZIO_SUSPEND_MMP)
return (ZPOOL_STATUS_IO_FAILURE_MMP);
if (suspended == ZIO_FAILURE_MODE_CONTINUE)
return (ZPOOL_STATUS_IO_FAILURE_CONTINUE);
return (ZPOOL_STATUS_IO_FAILURE_WAIT);
}
/*
* Could not read a log.
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
vs->vs_aux == VDEV_AUX_BAD_LOG) {
return (ZPOOL_STATUS_BAD_LOG);
}
/*
* Bad devices in non-replicated config.
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
find_vdev_problem(nvroot, vdev_faulted))
return (ZPOOL_STATUS_FAULTED_DEV_NR);
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
find_vdev_problem(nvroot, vdev_missing))
return (ZPOOL_STATUS_MISSING_DEV_NR);
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
find_vdev_problem(nvroot, vdev_broken))
return (ZPOOL_STATUS_CORRUPT_LABEL_NR);
/*
* Corrupted pool metadata
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
vs->vs_aux == VDEV_AUX_CORRUPT_DATA)
return (ZPOOL_STATUS_CORRUPT_POOL);
/*
* Persistent data errors.
*/
if (!isimport) {
if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_ERRCOUNT,
&nerr) == 0 && nerr != 0)
return (ZPOOL_STATUS_CORRUPT_DATA);
}
/*
* Missing devices in a replicated config.
*/
if (find_vdev_problem(nvroot, vdev_faulted))
return (ZPOOL_STATUS_FAULTED_DEV_R);
if (find_vdev_problem(nvroot, vdev_missing))
return (ZPOOL_STATUS_MISSING_DEV_R);
if (find_vdev_problem(nvroot, vdev_broken))
return (ZPOOL_STATUS_CORRUPT_LABEL_R);
/*
* Devices with errors
*/
if (!isimport && find_vdev_problem(nvroot, vdev_errors))
return (ZPOOL_STATUS_FAILING_DEV);
/*
* Offlined devices
*/
if (find_vdev_problem(nvroot, vdev_offlined))
return (ZPOOL_STATUS_OFFLINE_DEV);
/*
* Removed device
*/
if (find_vdev_problem(nvroot, vdev_removed))
return (ZPOOL_STATUS_REMOVED_DEV);
/*
* Informational errata available.
*/
(void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_ERRATA, &errata);
if (errata) {
*erratap = errata;
return (ZPOOL_STATUS_ERRATA);
}
/*
* Outdated, but usable, version
*/
if (SPA_VERSION_IS_SUPPORTED(version) && version != SPA_VERSION)
return (ZPOOL_STATUS_VERSION_OLDER);
/*
* Usable pool with disabled features
*/
if (version >= SPA_VERSION_FEATURES) {
int i;
nvlist_t *feat;
if (isimport) {
feat = fnvlist_lookup_nvlist(config,
ZPOOL_CONFIG_LOAD_INFO);
if (nvlist_exists(feat, ZPOOL_CONFIG_ENABLED_FEAT))
feat = fnvlist_lookup_nvlist(feat,
ZPOOL_CONFIG_ENABLED_FEAT);
} else {
feat = fnvlist_lookup_nvlist(config,
ZPOOL_CONFIG_FEATURE_STATS);
}
for (i = 0; i < SPA_FEATURES; i++) {
zfeature_info_t *fi = &spa_feature_table[i];
if (!nvlist_exists(feat, fi->fi_guid))
return (ZPOOL_STATUS_FEAT_DISABLED);
}
}
return (ZPOOL_STATUS_OK);
}
zpool_status_t
zpool_get_status(zpool_handle_t *zhp, char **msgid, zpool_errata_t *errata)
{
zpool_status_t ret = check_status(zhp->zpool_config, B_FALSE, errata);
if (msgid != NULL) {
if (ret >= NMSGID)
*msgid = NULL;
else
*msgid = zfs_msgid_table[ret];
}
return (ret);
}
zpool_status_t
zpool_import_status(nvlist_t *config, char **msgid, zpool_errata_t *errata)
{
zpool_status_t ret = check_status(config, B_TRUE, errata);
if (ret >= NMSGID)
*msgid = NULL;
else
*msgid = zfs_msgid_table[ret];
return (ret);
}