# Makefile.in generated by automake 1.16.1 from Makefile.am. # Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994-2018 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. ############################################################################### # Copyright (C) 2007-2013 Lawrence Livermore National Security, LLC. # Copyright (C) 2007 The Regents of the University of California. # Written by Brian Behlendorf . ############################################################################### # Build targets for RPM packages. ############################################################################### am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/zfs pkgincludedir = $(includedir)/zfs pkglibdir = $(libdir)/zfs pkglibexecdir = $(libexecdir)/zfs am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86_64-pc-linux-gnu host_triplet = x86_64-pc-linux-gnu target_triplet = x86_64-pc-linux-gnu am__append_1 = udev etc man scripts lib tests cmd contrib #am__append_2 = module subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/config/always-arch.m4 \ $(top_srcdir)/config/always-compiler-options.m4 \ $(top_srcdir)/config/always-python.m4 \ $(top_srcdir)/config/always-pyzfs.m4 \ $(top_srcdir)/config/ax_code_coverage.m4 \ $(top_srcdir)/config/ax_python_devel.m4 \ $(top_srcdir)/config/ax_restore_flags.m4 \ $(top_srcdir)/config/ax_save_flags.m4 \ $(top_srcdir)/config/find_system_library.m4 \ $(top_srcdir)/config/gettext.m4 \ $(top_srcdir)/config/host-cpu-c-abi.m4 \ $(top_srcdir)/config/iconv.m4 \ $(top_srcdir)/config/intlmacosx.m4 \ $(top_srcdir)/config/kernel-access-ok-type.m4 \ $(top_srcdir)/config/kernel-acl.m4 \ $(top_srcdir)/config/kernel-aio-fsync.m4 \ $(top_srcdir)/config/kernel-automount.m4 \ $(top_srcdir)/config/kernel-bdev-logical-size.m4 \ $(top_srcdir)/config/kernel-bdev-physical-size.m4 \ $(top_srcdir)/config/kernel-bdi.m4 \ $(top_srcdir)/config/kernel-bio-bvec-iter.m4 \ $(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \ $(top_srcdir)/config/kernel-bio-failfast.m4 \ $(top_srcdir)/config/kernel-bio-op.m4 \ $(top_srcdir)/config/kernel-bio-rw-barrier.m4 \ $(top_srcdir)/config/kernel-bio-rw-discard.m4 \ $(top_srcdir)/config/kernel-bio-tryget.m4 \ $(top_srcdir)/config/kernel-bio_set_dev.m4 \ $(top_srcdir)/config/kernel-blk-queue-bdi.m4 \ $(top_srcdir)/config/kernel-blk-queue-discard.m4 \ $(top_srcdir)/config/kernel-blk-queue-flags.m4 \ $(top_srcdir)/config/kernel-blk-queue-flush.m4 \ $(top_srcdir)/config/kernel-blk-queue-max-hw-sectors.m4 \ $(top_srcdir)/config/kernel-blk-queue-max-segments.m4 \ $(top_srcdir)/config/kernel-blk-queue-unplug.m4 \ $(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \ $(top_srcdir)/config/kernel-blkdev-reread-part.m4 \ $(top_srcdir)/config/kernel-block-device-operations.m4 \ $(top_srcdir)/config/kernel-clear-inode.m4 \ $(top_srcdir)/config/kernel-commit-metadata.m4 \ $(top_srcdir)/config/kernel-config-defined.m4 \ $(top_srcdir)/config/kernel-create-nameidata.m4 \ $(top_srcdir)/config/kernel-ctl-table-name.m4 \ $(top_srcdir)/config/kernel-current-time.m4 \ $(top_srcdir)/config/kernel-current_bio_tail.m4 \ $(top_srcdir)/config/kernel-declare-event-class.m4 \ $(top_srcdir)/config/kernel-dentry-operations.m4 \ $(top_srcdir)/config/kernel-dirty-inode.m4 \ $(top_srcdir)/config/kernel-discard-granularity.m4 \ $(top_srcdir)/config/kernel-encode-fh-inode.m4 \ $(top_srcdir)/config/kernel-evict-inode.m4 \ $(top_srcdir)/config/kernel-fallocate.m4 \ $(top_srcdir)/config/kernel-file-dentry.m4 \ $(top_srcdir)/config/kernel-file-inode.m4 \ $(top_srcdir)/config/kernel-fmode-t.m4 \ $(top_srcdir)/config/kernel-follow-down-one.m4 \ $(top_srcdir)/config/kernel-fpu.m4 \ $(top_srcdir)/config/kernel-fst-mount.m4 \ $(top_srcdir)/config/kernel-fsync.m4 \ $(top_srcdir)/config/kernel-generic_io_acct.m4 \ $(top_srcdir)/config/kernel-generic_readlink.m4 \ $(top_srcdir)/config/kernel-get-disk-and-module.m4 \ $(top_srcdir)/config/kernel-get-disk-ro.m4 \ $(top_srcdir)/config/kernel-get-link.m4 \ $(top_srcdir)/config/kernel-global_page_state.m4 \ $(top_srcdir)/config/kernel-group-info.m4 \ $(top_srcdir)/config/kernel-in-compat-syscall.m4 \ $(top_srcdir)/config/kernel-inode-getattr.m4 \ $(top_srcdir)/config/kernel-inode-lock.m4 \ $(top_srcdir)/config/kernel-inode-set-flags.m4 \ $(top_srcdir)/config/kernel-inode-set-iversion.m4 \ $(top_srcdir)/config/kernel-inode-times.m4 \ $(top_srcdir)/config/kernel-insert-inode-locked.m4 \ $(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \ $(top_srcdir)/config/kernel-is_owner_or_cap.m4 \ $(top_srcdir)/config/kernel-kmap-atomic-args.m4 \ $(top_srcdir)/config/kernel-kmem-cache.m4 \ $(top_srcdir)/config/kernel-kstrtoul.m4 \ $(top_srcdir)/config/kernel-ktime.m4 \ $(top_srcdir)/config/kernel-kuid-helpers.m4 \ $(top_srcdir)/config/kernel-kuidgid.m4 \ $(top_srcdir)/config/kernel-lookup-bdev.m4 \ $(top_srcdir)/config/kernel-lookup-nameidata.m4 \ $(top_srcdir)/config/kernel-lseek-execute.m4 \ $(top_srcdir)/config/kernel-make-request-fn.m4 \ $(top_srcdir)/config/kernel-misc-minor.m4 \ $(top_srcdir)/config/kernel-mkdir-umode-t.m4 \ $(top_srcdir)/config/kernel-mod-param.m4 \ $(top_srcdir)/config/kernel-objtool.m4 \ $(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \ $(top_srcdir)/config/kernel-pde-data.m4 \ $(top_srcdir)/config/kernel-proc-operations.m4 \ $(top_srcdir)/config/kernel-put-link.m4 \ $(top_srcdir)/config/kernel-rename.m4 \ $(top_srcdir)/config/kernel-rw.m4 \ $(top_srcdir)/config/kernel-rwsem.m4 \ $(top_srcdir)/config/kernel-sched.m4 \ $(top_srcdir)/config/kernel-security-inode-init.m4 \ $(top_srcdir)/config/kernel-set-nlink.m4 \ $(top_srcdir)/config/kernel-setattr-prepare.m4 \ $(top_srcdir)/config/kernel-sget-args.m4 \ $(top_srcdir)/config/kernel-show-options.m4 \ $(top_srcdir)/config/kernel-shrink.m4 \ $(top_srcdir)/config/kernel-submit_bio.m4 \ $(top_srcdir)/config/kernel-super-userns.m4 \ $(top_srcdir)/config/kernel-timer.m4 \ $(top_srcdir)/config/kernel-tmpfile.m4 \ $(top_srcdir)/config/kernel-totalhigh_pages.m4 \ $(top_srcdir)/config/kernel-totalram-pages-func.m4 \ $(top_srcdir)/config/kernel-truncate-range.m4 \ $(top_srcdir)/config/kernel-truncate-setsize.m4 \ $(top_srcdir)/config/kernel-userns-capabilities.m4 \ $(top_srcdir)/config/kernel-usleep_range.m4 \ $(top_srcdir)/config/kernel-vfs-direct_IO.m4 \ $(top_srcdir)/config/kernel-vfs-fsync.m4 \ $(top_srcdir)/config/kernel-vfs-getattr.m4 \ $(top_srcdir)/config/kernel-vfs-iterate.m4 \ $(top_srcdir)/config/kernel-vfs-rw-iterate.m4 \ $(top_srcdir)/config/kernel-wait.m4 \ $(top_srcdir)/config/kernel-xattr-handler.m4 \ $(top_srcdir)/config/kernel-zlib.m4 \ $(top_srcdir)/config/kernel.m4 $(top_srcdir)/config/lib-ld.m4 \ $(top_srcdir)/config/lib-link.m4 \ $(top_srcdir)/config/lib-prefix.m4 \ $(top_srcdir)/config/libtool.m4 \ $(top_srcdir)/config/ltoptions.m4 \ $(top_srcdir)/config/ltsugar.m4 \ $(top_srcdir)/config/ltversion.m4 \ $(top_srcdir)/config/lt~obsolete.m4 \ $(top_srcdir)/config/mount-helper.m4 \ $(top_srcdir)/config/nls.m4 $(top_srcdir)/config/pkg.m4 \ $(top_srcdir)/config/po.m4 $(top_srcdir)/config/progtest.m4 \ $(top_srcdir)/config/toolchain-simd.m4 \ $(top_srcdir)/config/user-dracut.m4 \ $(top_srcdir)/config/user-gettext.m4 \ $(top_srcdir)/config/user-libaio.m4 \ $(top_srcdir)/config/user-libblkid.m4 \ $(top_srcdir)/config/user-libexec.m4 \ $(top_srcdir)/config/user-libssl.m4 \ $(top_srcdir)/config/user-libtirpc.m4 \ $(top_srcdir)/config/user-libudev.m4 \ $(top_srcdir)/config/user-libuuid.m4 \ $(top_srcdir)/config/user-makedev.m4 \ $(top_srcdir)/config/user-runstatedir.m4 \ $(top_srcdir)/config/user-systemd.m4 \ $(top_srcdir)/config/user-sysvinit.m4 \ $(top_srcdir)/config/user-udev.m4 \ $(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \ $(top_srcdir)/config/zfs-build.m4 \ $(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ $(am__configure_deps) $(am__extra_HEADERS_DIST) \ $(am__DIST_COMMON) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = zfs_config.h CONFIG_CLEAN_FILES = module/Makefile module/avl/Makefile \ module/nvpair/Makefile module/unicode/Makefile \ module/zcommon/Makefile module/zfs/Makefile \ module/lua/Makefile module/icp/Makefile module/spl/Makefile \ zfs.release CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_$(V)) am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY)) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_$(V)) am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_$(V)) am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__extra_HEADERS_DIST = zfs.release.in zfs_config.h.in am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(extradir)" "$(DESTDIR)$(kerneldir)" HEADERS = $(extra_HEADERS) $(nodist_kernel_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ cscope distdir distdir-am dist dist-all distcheck am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ $(LISP)zfs_config.h.in # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags CSCOPE = cscope DIST_SUBDIRS = include rpm udev etc man scripts lib tests cmd contrib \ module am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config/deb.am \ $(srcdir)/config/rpm.am $(srcdir)/config/tgz.am \ $(srcdir)/zfs.release.in $(srcdir)/zfs_config.h.in \ $(top_srcdir)/config/compile $(top_srcdir)/config/config.guess \ $(top_srcdir)/config/config.rpath \ $(top_srcdir)/config/config.sub \ $(top_srcdir)/config/install-sh $(top_srcdir)/config/ltmain.sh \ $(top_srcdir)/config/missing $(top_srcdir)/module/Makefile.in \ $(top_srcdir)/module/avl/Makefile.in \ $(top_srcdir)/module/icp/Makefile.in \ $(top_srcdir)/module/lua/Makefile.in \ $(top_srcdir)/module/nvpair/Makefile.in \ $(top_srcdir)/module/spl/Makefile.in \ $(top_srcdir)/module/unicode/Makefile.in \ $(top_srcdir)/module/zcommon/Makefile.in \ $(top_srcdir)/module/zfs/Makefile.in AUTHORS NEWS \ config/compile config/config.guess config/config.rpath \ config/config.sub config/install-sh config/ltmain.sh \ config/missing DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best DIST_TARGETS = dist-gzip distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = ${SHELL} /src/zfs-builds-mm/zfs-0.8.4/config/missing aclocal-1.16 ALIEN = alien ALIEN_VERSION = 8.95 AMTAR = $${TAR-tar} AM_DEFAULT_VERBOSITY = 0 AR = ar ASAN_CFLAGS = ASAN_ENABLED = no ASAN_LDFLAGS = ASAN_ZFS = _without_asan AUTOCONF = ${SHELL} /src/zfs-builds-mm/zfs-0.8.4/config/missing autoconf AUTOHEADER = ${SHELL} /src/zfs-builds-mm/zfs-0.8.4/config/missing autoheader AUTOMAKE = ${SHELL} /src/zfs-builds-mm/zfs-0.8.4/config/missing automake-1.16 AWK = gawk CC = gcc CCAS = gcc CCASDEPMODE = depmode=gcc3 CCASFLAGS = -g -O2 CCDEPMODE = depmode=gcc3 CFLAGS = -g -O2 CODE_COVERAGE_CFLAGS = CODE_COVERAGE_CPPFLAGS = CODE_COVERAGE_CXXFLAGS = CODE_COVERAGE_ENABLED = no CODE_COVERAGE_LDFLAGS = CODE_COVERAGE_LIBS = CPP = gcc -E CPPFLAGS = CYGPATH_W = echo DEBUGINFO_ZFS = _without_debuginfo DEBUG_CFLAGS = DEBUG_CPPFLAGS = -UDEBUG -DNDEBUG DEBUG_KMEM_TRACKING_ZFS = _without_debug_kmem_tracking DEBUG_KMEM_ZFS = _without_debug_kmem DEBUG_LDFLAGS = DEBUG_ZFS = _without_debug DEFAULT_INITCONF_DIR = /etc/default DEFAULT_INIT_DIR = ${prefix}/etc/init.d DEFAULT_INIT_SCRIPT = lsb DEFAULT_PACKAGE = deb DEFINE_INITRAMFS = --define "_initramfs 1" DEFINE_PYTHON_PKG_VERSION = DEFINE_PYTHON_VERSION = DEFINE_PYZFS = DEFINE_SYSTEMD = --with systemd --define "_unitdir $(systemdunitdir)" --define "_presetdir $(systemdpresetdir)" --define "_generatordir $(systemdgeneratordir)" DEFS = -DHAVE_CONFIG_H DEPDIR = .deps DLLTOOL = false DPKG = dpkg DPKGBUILD = dpkg-buildpackage DPKGBUILD_VERSION = 1.19.7. DPKG_VERSION = 1.19.7 DSYMUTIL = DUMPBIN = ECHO_C = ECHO_N = -n ECHO_T = EGREP = /bin/grep -E EXEEXT = FGREP = /bin/grep -F FRAME_LARGER_THAN = -Wframe-larger-than=4096 GCOV = GENHTML = GETTEXT_MACRO_VERSION = 0.20 GMSGFMT = /usr/bin/msgfmt GMSGFMT_015 = /usr/bin/msgfmt GREP = /bin/grep HAVE_ALIEN = yes HAVE_DPKG = yes HAVE_DPKGBUILD = yes HAVE_RPM = yes HAVE_RPMBUILD = yes INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s INTLLIBS = INTL_MACOSX_LIBS = KERNEL_DEBUG_CFLAGS = KERNEL_DEBUG_CPPFLAGS = -UDEBUG -DNDEBUG KERNEL_MAKE = LCOV = LD = /usr/bin/ld -m elf_x86_64 LDFLAGS = LIBAIO = -laio LIBBLKID = -lblkid LIBICONV = LIBINTL = LIBOBJS = LIBS = -ludev -luuid -lz LIBSSL = -lssl -lcrypto LIBTIRPC_CFLAGS = LIBTIRPC_LIBS = LIBTOOL = $(SHELL) $(top_builddir)/libtool LIBUDEV = -ludev LIBUUID = -luuid LINUX = LINUX_OBJ = LINUX_SYMBOLS = LINUX_VERSION = LIPO = LN_S = ln -s LTLIBICONV = LTLIBINTL = LTLIBOBJS = LT_SYS_LIBRARY_PATH = MAINT = # MAKEINFO = ${SHELL} /src/zfs-builds-mm/zfs-0.8.4/config/missing makeinfo MANIFEST_TOOL = : MKDIR_P = /bin/mkdir -p MSGFMT = /usr/bin/msgfmt MSGMERGE = /usr/bin/msgmerge MSGMERGE_FOR_MSGFMT_OPTION = --no-fuzzy-matching --no-location --quiet MULTIARCH_LIBDIR = lib/x86_64-linux-gnu NM = /usr/bin/nm -B NMEDIT = NO_BOOL_COMPARE = -Wno-bool-compare NO_FORMAT_TRUNCATION = -Wno-format-truncation NO_OMIT_FRAME_POINTER = -fno-omit-frame-pointer NO_UNUSED_BUT_SET_VARIABLE = -Wno-unused-but-set-variable OBJDUMP = objdump OBJEXT = o OTOOL = OTOOL64 = PACKAGE = zfs PACKAGE_BUGREPORT = PACKAGE_NAME = zfs PACKAGE_STRING = zfs 0.8.4 PACKAGE_TARNAME = zfs PACKAGE_URL = PACKAGE_VERSION = 0.8.4 PATH_SEPARATOR = : PKG_CONFIG = /usr/bin/pkg-config PKG_CONFIG_LIBDIR = PKG_CONFIG_PATH = POSUB = po PYTHON = /usr/bin/python3.8 PYTHON_CPPFLAGS = -I/usr/include/python3.8 PYTHON_EXEC_PREFIX = ${exec_prefix} PYTHON_EXTRA_LDFLAGS = -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions PYTHON_EXTRA_LIBS = -lcrypt -lpthread -ldl -lutil -lm -lm PYTHON_LIBS = -L/usr/lib -lpython3.8 PYTHON_PLATFORM = linux PYTHON_PREFIX = ${prefix} PYTHON_SITE_PKG = /usr/lib/python3/dist-packages PYTHON_VERSION = 3.8 PYZFS_ENABLED = yes QAT_OBJ = QAT_SRC = QAT_SYMBOLS = RANLIB = ranlib RELEASE = 1 RM = rm -f RPM = rpm RPMBUILD = rpmbuild RPMBUILD_VERSION = 4.14.2.1 RPM_DEFINE_COMMON = --define "$(DEBUG_ZFS) 1" --define "$(DEBUG_KMEM_ZFS) 1" --define "$(DEBUG_KMEM_TRACKING_ZFS) 1" --define "$(DEBUGINFO_ZFS) 1" --define "$(ASAN_ZFS) 1" RPM_DEFINE_DKMS = RPM_DEFINE_KMOD = --define "kernels $(LINUX_VERSION)" --define "ksrc $(LINUX)" --define "kobj $(LINUX_OBJ)" --define "_wrong_version_format_terminate_build 0" RPM_DEFINE_UTIL = --define "_initconfdir $(DEFAULT_INITCONF_DIR)" $(DEFINE_INITRAMFS) $(DEFINE_SYSTEMD) $(DEFINE_PYZFS) $(DEFINE_PYTHON_VERSION) $(DEFINE_PYTHON_PKG_VERSION) --define "_lib $(MULTIARCH_LIBDIR)" RPM_SPEC_DIR = rpm/generic RPM_VERSION = 4.14.2.1 SED = /bin/sed SET_MAKE = SHELL = /bin/bash SRPM_DEFINE_COMMON = --define "build_src_rpm 1" SRPM_DEFINE_DKMS = SRPM_DEFINE_KMOD = SRPM_DEFINE_UTIL = STRIP = strip TARGET_ASM_DIR = asm-x86_64 TEST_JOBS = 4 USE_NLS = yes VENDOR = ubuntu VERSION = 0.8.4 XGETTEXT = /usr/bin/xgettext XGETTEXT_015 = /usr/bin/xgettext XGETTEXT_EXTRA_OPTIONS = ZFS_CONFIG = user ZFS_INIT_SYSTEMD = systemd ZFS_INIT_SYSV = init.d ZFS_META_ALIAS = zfs-0.8.4-1 ZFS_META_AUTHOR = OpenZFS on Linux ZFS_META_DATA = ZFS_META_KVER_MAX = 5.6 ZFS_META_KVER_MIN = 2.6.32 ZFS_META_LICENSE = CDDL ZFS_META_LT_AGE = ZFS_META_LT_CURRENT = ZFS_META_LT_REVISION = ZFS_META_NAME = zfs ZFS_META_RELEASE = 1 ZFS_META_VERSION = 0.8.4 ZFS_MODULE_LOAD = modules-load.d ZLIB = -lz ZONENAME = echo global abs_builddir = /src/zfs-builds-mm/zfs-0.8.4 abs_srcdir = /src/zfs-builds-mm/zfs-0.8.4 abs_top_builddir = /src/zfs-builds-mm/zfs-0.8.4 abs_top_srcdir = /src/zfs-builds-mm/zfs-0.8.4 ac_ct_AR = ar ac_ct_CC = gcc ac_ct_DUMPBIN = am__include = include am__leading_dot = . am__quote = am__tar = tar --format=posix -chf - "$$tardir" am__untar = tar -xf - bindir = ${exec_prefix}/bin build = x86_64-pc-linux-gnu build_alias = build_cpu = x86_64 build_os = linux-gnu build_vendor = pc builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dracutdir = /usr/lib/dracut dvidir = ${docdir} exec_prefix = ${prefix} host = x86_64-pc-linux-gnu host_alias = host_cpu = x86_64 host_os = linux-gnu host_vendor = pc htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = ${SHELL} /src/zfs-builds-mm/zfs-0.8.4/config/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = ${datarootdir}/man mkdir_p = $(MKDIR_P) modulesloaddir = /usr/lib/modules-load.d mounthelperdir = /sbin oldincludedir = /usr/include pdfdir = ${docdir} pkgpyexecdir = ${pyexecdir}/zfs pkgpythondir = ${pythondir}/zfs prefix = /usr/local program_transform_name = s,x,x, psdir = ${docdir} pyexecdir = ${exec_prefix}/lib/python3.8/site-packages pythondir = ${prefix}/lib/python3.8/site-packages pythonsitedir = /usr/lib/python3/dist-packages runstatedir = ${localstatedir}/run sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = . sysconfdir = ${prefix}/etc systemdgeneratordir = /usr/lib/systemd/system-generators systemdpresetdir = /usr/lib/systemd/system-preset systemdunitdir = /usr/lib/systemd/system target = x86_64-pc-linux-gnu target_alias = target_cpu = x86_64 target_os = linux-gnu target_vendor = pc top_build_prefix = top_builddir = . top_srcdir = . udevdir = /lib/udev udevruledir = /lib/udev/rules.d zfsexecdir = ${exec_prefix}/libexec/zfs ACLOCAL_AMFLAGS = -I config SUBDIRS = include rpm $(am__append_1) $(am__append_2) #extradir = $(prefix)/src/zfs-$(VERSION) #extra_HEADERS = zfs.release.in zfs_config.h.in #kerneldir = $(prefix)/src/zfs-$(VERSION)/$(LINUX_VERSION) #nodist_kernel_HEADERS = zfs.release zfs_config.h module/$(LINUX_SYMBOLS) AUTOMAKE_OPTIONS = foreign # Include all the extra licensing information for modules EXTRA_DIST = autogen.sh copy-builtin config/config.awk config/rpm.am \ config/deb.am config/tgz.am META AUTHORS COPYRIGHT LICENSE \ NEWS NOTICE README.md CODE_OF_CONDUCT.md \ module/icp/algs/skein/THIRDPARTYLICENSE \ module/icp/algs/skein/THIRDPARTYLICENSE.descrip \ module/icp/asm-x86_64/aes/THIRDPARTYLICENSE.gladman \ module/icp/asm-x86_64/aes/THIRDPARTYLICENSE.gladman.descrip \ module/icp/asm-x86_64/aes/THIRDPARTYLICENSE.openssl \ module/icp/asm-x86_64/aes/THIRDPARTYLICENSE.openssl.descrip \ module/spl/THIRDPARTYLICENSE.gplv2 \ module/spl/THIRDPARTYLICENSE.gplv2.descrip \ module/zfs/THIRDPARTYLICENSE.cityhash \ module/zfs/THIRDPARTYLICENSE.cityhash.descrip BUILT_SOURCES = gitrev all: $(BUILT_SOURCES) zfs_config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: Makefile @: $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(srcdir)/config/rpm.am $(srcdir)/config/deb.am $(srcdir)/config/tgz.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ esac; $(srcdir)/config/rpm.am $(srcdir)/config/deb.am $(srcdir)/config/tgz.am $(am__empty): $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: # $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): # $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): zfs_config.h: stamp-h1 @test -f $@ || rm -f stamp-h1 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 stamp-h1: $(srcdir)/zfs_config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status zfs_config.h $(srcdir)/zfs_config.h.in: # $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f zfs_config.h stamp-h1 module/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/Makefile.in cd $(top_builddir) && $(SHELL) ./config.status $@ module/avl/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/avl/Makefile.in cd $(top_builddir) && $(SHELL) ./config.status $@ module/nvpair/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/nvpair/Makefile.in cd $(top_builddir) && $(SHELL) ./config.status $@ module/unicode/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/unicode/Makefile.in cd $(top_builddir) && $(SHELL) ./config.status $@ module/zcommon/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zcommon/Makefile.in cd $(top_builddir) && $(SHELL) ./config.status $@ module/zfs/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zfs/Makefile.in cd $(top_builddir) && $(SHELL) ./config.status $@ module/lua/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/lua/Makefile.in cd $(top_builddir) && $(SHELL) ./config.status $@ module/icp/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/icp/Makefile.in cd $(top_builddir) && $(SHELL) ./config.status $@ module/spl/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/spl/Makefile.in cd $(top_builddir) && $(SHELL) ./config.status $@ zfs.release: $(top_builddir)/config.status $(srcdir)/zfs.release.in cd $(top_builddir) && $(SHELL) ./config.status $@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt install-extraHEADERS: $(extra_HEADERS) @$(NORMAL_INSTALL) @list='$(extra_HEADERS)'; test -n "$(extradir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(extradir)'"; \ $(MKDIR_P) "$(DESTDIR)$(extradir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(extradir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(extradir)" || exit $$?; \ done uninstall-extraHEADERS: @$(NORMAL_UNINSTALL) @list='$(extra_HEADERS)'; test -n "$(extradir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(extradir)'; $(am__uninstall_files_from_dir) install-nodist_kernelHEADERS: $(nodist_kernel_HEADERS) @$(NORMAL_INSTALL) @list='$(nodist_kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(kerneldir)'"; \ $(MKDIR_P) "$(DESTDIR)$(kerneldir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(kerneldir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(kerneldir)" || exit $$?; \ done uninstall-nodist_kernelHEADERS: @$(NORMAL_UNINSTALL) @list='$(nodist_kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(kerneldir)'; $(am__uninstall_files_from_dir) # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-tarZ: distdir @echo WARNING: "Support for distribution archives compressed with" \ "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir @echo WARNING: "Support for shar distribution archives is" \ "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build/sub \ && ../../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ --srcdir=../.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive all-am: Makefile $(HEADERS) zfs_config.h all-local installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(extradir)" "$(DESTDIR)$(kerneldir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) install-data-hook: clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-local distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-extraHEADERS install-nodist_kernelHEADERS @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-data-hook install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-extraHEADERS uninstall-nodist_kernelHEADERS .MAKE: $(am__recursive_targets) all check install install-am \ install-data-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \ am--refresh check check-am clean clean-cscope clean-generic \ clean-libtool cscope cscopelist-am ctags ctags-am dist \ dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ dist-tarZ dist-xz dist-zip distcheck distclean \ distclean-generic distclean-hdr distclean-libtool \ distclean-local distclean-tags distcleancheck distdir \ distuninstallcheck dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am \ install-data-hook install-dvi install-dvi-am install-exec \ install-exec-am install-extraHEADERS install-html \ install-html-am install-info install-info-am install-man \ install-nodist_kernelHEADERS install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am uninstall-extraHEADERS \ uninstall-nodist_kernelHEADERS .PRECIOUS: Makefile srpm-kmod: $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-kmod" \ def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_KMOD}' srpm-common srpm-dkms: $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-dkms" \ def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_DKMS}' srpm-common srpm-utils: $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" \ def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_UTIL}' srpm-common srpm: srpm-kmod srpm-dkms srpm-utils srpms: srpm-kmod srpm-dkms srpm-utils rpm-kmod: srpm-kmod $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-kmod" \ def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_KMOD}' rpm-common rpm-dkms: srpm-dkms $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-dkms" \ def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_DKMS}' rpm-common rpm-utils: srpm-utils $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" \ def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_UTIL}' rpm-common rpm: rpm-kmod rpm-dkms rpm-utils rpms: rpm-kmod rpm-dkms rpm-utils rpm-local: @(if test "${HAVE_RPMBUILD}" = "no"; then \ echo -e "\n" \ "*** Required util ${RPMBUILD} missing. Please install the\n" \ "*** package for your distribution which provides ${RPMBUILD},\n" \ "*** re-run configure, and try again.\n"; \ exit 1; \ fi; \ mkdir -p $(rpmbuild)/TMP && \ mkdir -p $(rpmbuild)/BUILD && \ mkdir -p $(rpmbuild)/RPMS && \ mkdir -p $(rpmbuild)/SRPMS && \ mkdir -p $(rpmbuild)/SPECS && \ cp ${RPM_SPEC_DIR}/$(rpmspec) $(rpmbuild)/SPECS && \ mkdir -p $(rpmbuild)/SOURCES && \ cp $(top_srcdir)/scripts/kmodtool $(rpmbuild)/SOURCES && \ cp $(distdir).tar.gz $(rpmbuild)/SOURCES) srpm-common: dist @(dist=`$(RPM) --eval %{?dist}`; \ rpmpkg=$(pkg)-$(VERSION)-$(RELEASE)$$dist*src.rpm; \ rpmspec=$(pkg).spec; \ rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \ $(MAKE) $(AM_MAKEFLAGS) \ rpmbuild="$$rpmbuild" \ rpmspec="$$rpmspec" \ rpm-local || exit 1; \ LANG=C $(RPMBUILD) \ --define "_tmppath $$rpmbuild/TMP" \ --define "_topdir $$rpmbuild" \ $(def) -bs $$rpmbuild/SPECS/$$rpmspec || exit 1; \ cp $$rpmbuild/SRPMS/$$rpmpkg . || exit 1; \ rm -R $$rpmbuild) rpm-common: @(dist=`$(RPM) --eval %{?dist}`; \ rpmpkg=$(pkg)-$(VERSION)-$(RELEASE)$$dist*src.rpm; \ rpmspec=$(pkg).spec; \ rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \ $(MAKE) $(AM_MAKEFLAGS) \ rpmbuild="$$rpmbuild" \ rpmspec="$$rpmspec" \ rpm-local || exit 1; \ LANG=C ${RPMBUILD} \ --define "_tmppath $$rpmbuild/TMP" \ --define "_topdir $$rpmbuild" \ $(def) --rebuild $$rpmpkg || exit 1; \ cp $$rpmbuild/RPMS/*/* . || exit 1; \ rm -R $$rpmbuild) deb-local: @(if test "${HAVE_DPKGBUILD}" = "no"; then \ echo -e "\n" \ "*** Required util ${DPKGBUILD} missing. Please install the\n" \ "*** package for your distribution which provides ${DPKGBUILD},\n" \ "*** re-run configure, and try again.\n"; \ exit 1; \ fi; \ if test "${HAVE_ALIEN}" = "no"; then \ echo -e "\n" \ "*** Required util ${ALIEN} missing. Please install the\n" \ "*** package for your distribution which provides ${ALIEN},\n" \ "*** re-run configure, and try again.\n"; \ exit 1; \ fi) deb-kmod: deb-local rpm-kmod name=${PACKAGE}; \ version=${VERSION}-${RELEASE}; \ arch=`$(RPM) -qp $${name}-kmod-$${version}.src.rpm --qf %{arch} | tail -1`; \ debarch=`$(DPKG) --print-architecture`; \ pkg1=kmod-$${name}*$${version}.$${arch}.rpm; \ fakeroot $(ALIEN) --bump=0 --scripts --to-deb --target=$$debarch $$pkg1 || exit 1; \ $(RM) $$pkg1 deb-dkms: deb-local rpm-dkms name=${PACKAGE}; \ version=${VERSION}-${RELEASE}; \ arch=`$(RPM) -qp $${name}-dkms-$${version}.src.rpm --qf %{arch} | tail -1`; \ debarch=`$(DPKG) --print-architecture`; \ pkg1=$${name}-dkms-$${version}.$${arch}.rpm; \ fakeroot $(ALIEN) --bump=0 --scripts --to-deb --target=$$debarch $$pkg1 || exit 1; \ $(RM) $$pkg1 deb-utils: deb-local rpm-utils name=${PACKAGE}; \ version=${VERSION}-${RELEASE}; \ arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \ debarch=`$(DPKG) --print-architecture`; \ pkg1=$${name}-$${version}.$${arch}.rpm; \ pkg2=libnvpair1-$${version}.$${arch}.rpm; \ pkg3=libuutil1-$${version}.$${arch}.rpm; \ pkg4=libzfs2-$${version}.$${arch}.rpm; \ pkg5=libzpool2-$${version}.$${arch}.rpm; \ pkg6=libzfs2-devel-$${version}.$${arch}.rpm; \ pkg7=$${name}-test-$${version}.$${arch}.rpm; \ pkg8=$${name}-dracut-$${version}.noarch.rpm; \ pkg9=$${name}-initramfs-$${version}.$${arch}.rpm; \ pkg10=`ls python*-pyzfs-$${version}* | tail -1`; \ path_prepend=`mktemp -d /tmp/intercept.XXX`; \ echo "#$(SHELL)" > $${path_prepend}/dh_shlibdeps; \ echo "`which dh_shlibdeps` -- \ -xlibuutil1linux -xlibnvpair1linux -xlibzfs2linux -xlibzpool2linux" \ >> $${path_prepend}/dh_shlibdeps; \ chmod +x $${path_prepend}/dh_shlibdeps; \ env PATH=$${path_prepend}:$${PATH} \ fakeroot $(ALIEN) --bump=0 --scripts --to-deb --target=$$debarch \ $$pkg1 $$pkg2 $$pkg3 $$pkg4 $$pkg5 $$pkg6 $$pkg7 \ $$pkg8 $$pkg9 $$pkg10 || exit 1; \ $(RM) $${path_prepend}/dh_shlibdeps; \ rmdir $${path_prepend}; \ $(RM) $$pkg1 $$pkg2 $$pkg3 $$pkg4 $$pkg5 $$pkg6 $$pkg7 \ $$pkg8 $$pkg9 $$pkg10; deb: deb-kmod deb-dkms deb-utils tgz-local: @(if test "${HAVE_ALIEN}" = "no"; then \ echo -e "\n" \ "*** Required util ${ALIEN} missing. Please install the\n" \ "*** package for your distribution which provides ${ALIEN},\n" \ "*** re-run configure, and try again.\n"; \ exit 1; \ fi) tgz-kmod: tgz-local rpm-kmod # name=${PACKAGE}; \ # version=${VERSION}-${RELEASE}; \ # arch=`$(RPM) -qp $${name}-kmod-$${version}.src.rpm --qf %{arch} | tail -1`; \ # pkg1=kmod-$${name}*$${version}.$${arch}.rpm; \ # fakeroot $(ALIEN) --scripts --to-tgz $$pkg1; \ # $(RM) $$pkg1 tgz-utils: tgz-local rpm-utils name=${PACKAGE}; \ version=${VERSION}-${RELEASE}; \ arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \ pkg1=$${name}-$${version}.$${arch}.rpm; \ pkg2=$${name}-devel-$${version}.$${arch}.rpm; \ pkg3=$${name}-test-$${version}.$${arch}.rpm; \ fakeroot $(ALIEN) --scripts --to-tgz $$pkg1 $$pkg2 $$pkg3; \ $(RM) $$pkg1 $$pkg2 $$pkg3 tgz: tgz-kmod tgz-utils # Code coverage # # Optional: # - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting. # Multiple directories may be specified, separated by whitespace. # (Default: $(top_builddir)) # - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated # by lcov for code coverage. (Default: # $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info) # - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage # reports to be created. (Default: # $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage) # - CODE_COVERAGE_BRANCH_COVERAGE: Set to 1 to enforce branch coverage, # set to 0 to disable it and leave empty to stay with the default. # (Default: empty) # - CODE_COVERAGE_LCOV_SHOPTS_DEFAULT: Extra options shared between both lcov # instances. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE) # - CODE_COVERAGE_LCOV_SHOPTS: Extra options to shared between both lcov # instances. (Default: $CODE_COVERAGE_LCOV_SHOPTS_DEFAULT) # - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov # - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the # collecting lcov instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) # - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the collecting lcov # instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) # - CODE_COVERAGE_LCOV_RMOPTS_DEFAULT: Extra options to pass to the filtering # lcov instance. (Default: empty) # - CODE_COVERAGE_LCOV_RMOPTS: Extra options to pass to the filtering lcov # instance. (Default: $CODE_COVERAGE_LCOV_RMOPTS_DEFAULT) # - CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT: Extra options to pass to the # genhtml instance. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE) # - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml # instance. (Default: $CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT) # - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore # # The generated report will be titled using the $(PACKAGE_NAME) and # $(PACKAGE_VERSION). In order to add the current git hash to the title, # use the git-version-gen script, available online. # Optional variables CODE_COVERAGE_DIRECTORY ?= $(top_builddir) CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage CODE_COVERAGE_BRANCH_COVERAGE ?= CODE_COVERAGE_LCOV_SHOPTS_DEFAULT ?= $(if $(CODE_COVERAGE_BRANCH_COVERAGE),\ --rc lcov_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE)) CODE_COVERAGE_LCOV_SHOPTS ?= $(CODE_COVERAGE_LCOV_SHOPTS_DEFAULT) CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool "$(GCOV)" CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= $(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) CODE_COVERAGE_LCOV_OPTIONS ?= $(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) CODE_COVERAGE_LCOV_RMOPTS_DEFAULT ?= CODE_COVERAGE_LCOV_RMOPTS ?= $(CODE_COVERAGE_LCOV_RMOPTS_DEFAULT) CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT ?=\ $(if $(CODE_COVERAGE_BRANCH_COVERAGE),\ --rc genhtml_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE)) CODE_COVERAGE_GENHTML_OPTIONS ?= $(CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT) CODE_COVERAGE_IGNORE_PATTERN ?= GITIGNOREFILES ?= GITIGNOREFILES += $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY) code_coverage_v_lcov_cap = $(code_coverage_v_lcov_cap_$(V)) code_coverage_v_lcov_cap_ = $(code_coverage_v_lcov_cap_$(AM_DEFAULT_VERBOSITY)) code_coverage_v_lcov_cap_0 = @echo " LCOV --capture"\ $(CODE_COVERAGE_OUTPUT_FILE); code_coverage_v_lcov_ign = $(code_coverage_v_lcov_ign_$(V)) code_coverage_v_lcov_ign_ = $(code_coverage_v_lcov_ign_$(AM_DEFAULT_VERBOSITY)) code_coverage_v_lcov_ign_0 = @echo " LCOV --remove /tmp/*"\ $(CODE_COVERAGE_IGNORE_PATTERN); code_coverage_v_genhtml = $(code_coverage_v_genhtml_$(V)) code_coverage_v_genhtml_ = $(code_coverage_v_genhtml_$(AM_DEFAULT_VERBOSITY)) code_coverage_v_genhtml_0 = @echo " GEN " $(CODE_COVERAGE_OUTPUT_DIRECTORY); code_coverage_quiet = $(code_coverage_quiet_$(V)) code_coverage_quiet_ = $(code_coverage_quiet_$(AM_DEFAULT_VERBOSITY)) code_coverage_quiet_0 = --quiet # sanitizes the test-name: replaces with underscores: dashes and dots code_coverage_sanitize = $(subst -,_,$(subst .,_,$(1))) # Use recursive makes in order to ignore errors during check check-code-coverage: @echo "Need to reconfigure with --enable-code-coverage" # Capture code coverage data code-coverage-capture: code-coverage-capture-hook @echo "Need to reconfigure with --enable-code-coverage" # Hook rule executed before code-coverage-capture, overridable by the user code-coverage-capture-hook: AM_DISTCHECK_CONFIGURE_FLAGS ?= AM_DISTCHECK_CONFIGURE_FLAGS += --disable-code-coverage .PHONY: check-code-coverage code-coverage-capture code-coverage-capture-hook code-coverage-clean .PHONY: gitrev gitrev: -${top_srcdir}/scripts/make_gitrev.sh # Double-colon rules are allowed; there are multiple independent definitions. distclean-local:: -$(RM) -R autom4te*.cache build -find . \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \ -o -name .pc -o -name .hg -o -name .git \) -prune -o \ \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ -o -name '.*.rej' -o -size 0 -o -name '*%' -o -name '.*.cmd' \ -o -name 'core' -o -name 'Makefile' -o -name 'Module.symvers' \ -o -name '*.order' -o -name '*.markers' -o -name '*.gcda' \ -o -name '*.gcno' \) \ -type f -print | xargs $(RM) all-local: -[ -x ${top_builddir}/scripts/zfs-tests.sh ] && \ ${top_builddir}/scripts/zfs-tests.sh -c dist-hook: gitrev cp ${top_srcdir}/include/zfs_gitrev.h $(distdir)/include; \ sed -i 's/Release:[[:print:]]*/Release: $(RELEASE)/' \ $(distdir)/META # For compatibility, create a matching spl-x.y.z directly which contains # symlinks to the updated header and object file locations. These # compatibility links will be removed in the next major release. #install-data-hook: # rm -rf $(DESTDIR)$(prefix)/src/spl-$(VERSION) && \ # mkdir $(DESTDIR)$(prefix)/src/spl-$(VERSION) && \ # cd $(DESTDIR)$(prefix)/src/spl-$(VERSION) && \ # ln -s ../zfs-$(VERSION)/include/spl include && \ # ln -s ../zfs-$(VERSION)/$(LINUX_VERSION) $(LINUX_VERSION) && \ # ln -s ../zfs-$(VERSION)/zfs_config.h.in spl_config.h.in && \ # ln -s ../zfs-$(VERSION)/zfs.release.in spl.release.in && \ # cd $(DESTDIR)$(prefix)/src/zfs-$(VERSION)/$(LINUX_VERSION) && \ # ln -fs zfs_config.h spl_config.h && \ # ln -fs zfs.release spl.release codecheck: cstyle shellcheck flake8 mancheck testscheck vcscheck checkstyle: codecheck commitcheck commitcheck: @if git rev-parse --git-dir > /dev/null 2>&1; then \ ${top_srcdir}/scripts/commitcheck.sh; \ fi cstyle: @find ${top_srcdir} -name build -prune -o -name '*.[hc]' \ ! -name 'zfs_config.*' ! -name '*.mod.c' -type f \ -exec ${top_srcdir}/scripts/cstyle.pl -cpP {} \+ shellcheck: @if type shellcheck > /dev/null 2>&1; then \ shellcheck --exclude=SC1090 --format=gcc \ $$(find ${top_srcdir}/scripts/*.sh -type f) \ $$(find ${top_srcdir}/cmd/zed/zed.d/*.sh -type f) \ $$(find ${top_srcdir}/cmd/zpool/zpool.d/* -executable); \ else \ echo "skipping shellcheck because shellcheck is not installed"; \ fi mancheck: @if type mandoc > /dev/null 2>&1; then \ find ${top_srcdir}/man/man8 -type f -name 'zfs.8' \ -o -name 'zpool.8' -o -name 'zdb.8' \ -o -name 'zgenhostid.8' | \ xargs mandoc -Tlint -Werror; \ else \ echo "skipping mancheck because mandoc is not installed"; \ fi testscheck: @find ${top_srcdir}/tests/zfs-tests -type f \ \( -name '*.ksh' -not -executable \) -o \ \( -name '*.kshlib' -executable \) -o \ \( -name '*.shlib' -executable \) -o \ \( -name '*.cfg' -executable \) | \ xargs -r stat -c '%A %n' | \ awk '{c++; print} END {if(c>0) exit 1}' vcscheck: @if git rev-parse --git-dir > /dev/null 2>&1; then \ git ls-files . --exclude-standard --others | \ awk '{c++; print} END {if(c>0) exit 1}' ; \ fi lint: cppcheck paxcheck cppcheck: @if type cppcheck > /dev/null 2>&1; then \ cppcheck --quiet --force --error-exitcode=2 --inline-suppr \ --suppressions-list=.github/suppressions.txt \ -UHAVE_SSE2 -UHAVE_AVX512F -UHAVE_UIO_ZEROCOPY \ ${top_srcdir}; \ else \ echo "skipping cppcheck because cppcheck is not installed"; \ fi paxcheck: @if type scanelf > /dev/null 2>&1; then \ ${top_srcdir}/scripts/paxcheck.sh ${top_srcdir}; \ else \ echo "skipping paxcheck because scanelf is not installed"; \ fi flake8: @if type flake8 > /dev/null 2>&1; then \ flake8 ${top_srcdir}; \ else \ echo "skipping flake8 because flake8 is not installed"; \ fi ctags: $(RM) tags find $(top_srcdir) -name .git -prune -o -name '*.[hc]' | xargs ctags etags: $(RM) TAGS find $(top_srcdir) -name .pc -prune -o -name '*.[hc]' | xargs etags -a tags: ctags etags pkg: deb pkg-dkms: deb-dkms pkg-kmod: deb-kmod pkg-utils: deb-utils # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: