zfs-builds-mm/zfs-0.8.0/Makefile

1672 lines
58 KiB
Makefile
Raw Normal View History

2019-07-06 23:40:11 +02:00
# Makefile.in generated by automake 1.15.1 from Makefile.am.
# Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
###############################################################################
# Copyright (C) 2007-2013 Lawrence Livermore National Security, LLC.
# Copyright (C) 2007 The Regents of the University of California.
# Written by Brian Behlendorf <behlendorf1@llnl.gov>.
###############################################################################
# Build targets for RPM packages.
###############################################################################
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/zfs
pkgincludedir = $(includedir)/zfs
pkglibdir = $(libdir)/zfs
pkglibexecdir = $(libexecdir)/zfs
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-pc-linux-gnu
host_triplet = x86_64-pc-linux-gnu
target_triplet = x86_64-pc-linux-gnu
am__append_1 = udev etc man scripts lib tests cmd contrib
#am__append_2 = module
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/config/always-arch.m4 \
$(top_srcdir)/config/always-compiler-options.m4 \
$(top_srcdir)/config/always-python.m4 \
$(top_srcdir)/config/always-pyzfs.m4 \
$(top_srcdir)/config/ax_code_coverage.m4 \
$(top_srcdir)/config/ax_python_devel.m4 \
$(top_srcdir)/config/ax_restore_flags.m4 \
$(top_srcdir)/config/ax_save_flags.m4 \
$(top_srcdir)/config/find_system_library.m4 \
$(top_srcdir)/config/gettext.m4 \
$(top_srcdir)/config/host-cpu-c-abi.m4 \
$(top_srcdir)/config/iconv.m4 \
$(top_srcdir)/config/intlmacosx.m4 \
$(top_srcdir)/config/kernel-access-ok-type.m4 \
$(top_srcdir)/config/kernel-acl-refcount.m4 \
$(top_srcdir)/config/kernel-acl.m4 \
$(top_srcdir)/config/kernel-aio-fsync.m4 \
$(top_srcdir)/config/kernel-automount.m4 \
$(top_srcdir)/config/kernel-bdev-logical-size.m4 \
$(top_srcdir)/config/kernel-bdev-physical-size.m4 \
$(top_srcdir)/config/kernel-bdi.m4 \
$(top_srcdir)/config/kernel-bio-bvec-iter.m4 \
$(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
$(top_srcdir)/config/kernel-bio-failfast.m4 \
$(top_srcdir)/config/kernel-bio-op.m4 \
$(top_srcdir)/config/kernel-bio-rw-barrier.m4 \
$(top_srcdir)/config/kernel-bio-rw-discard.m4 \
$(top_srcdir)/config/kernel-bio_set_dev.m4 \
$(top_srcdir)/config/kernel-blk-queue-bdi.m4 \
$(top_srcdir)/config/kernel-blk-queue-discard.m4 \
$(top_srcdir)/config/kernel-blk-queue-flags.m4 \
$(top_srcdir)/config/kernel-blk-queue-flush.m4 \
$(top_srcdir)/config/kernel-blk-queue-max-hw-sectors.m4 \
$(top_srcdir)/config/kernel-blk-queue-max-segments.m4 \
$(top_srcdir)/config/kernel-blk-queue-unplug.m4 \
$(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
$(top_srcdir)/config/kernel-blkdev-reread-part.m4 \
$(top_srcdir)/config/kernel-block-device-operations.m4 \
$(top_srcdir)/config/kernel-clear-inode.m4 \
$(top_srcdir)/config/kernel-commit-metadata.m4 \
$(top_srcdir)/config/kernel-create-nameidata.m4 \
$(top_srcdir)/config/kernel-ctl-table-name.m4 \
$(top_srcdir)/config/kernel-current-time.m4 \
$(top_srcdir)/config/kernel-current_bio_tail.m4 \
$(top_srcdir)/config/kernel-d-make-root.m4 \
$(top_srcdir)/config/kernel-d-obtain-alias.m4 \
$(top_srcdir)/config/kernel-d-prune-aliases.m4 \
$(top_srcdir)/config/kernel-declare-event-class.m4 \
$(top_srcdir)/config/kernel-dentry-operations.m4 \
$(top_srcdir)/config/kernel-dirty-inode.m4 \
$(top_srcdir)/config/kernel-discard-granularity.m4 \
$(top_srcdir)/config/kernel-elevator-change.m4 \
$(top_srcdir)/config/kernel-encode-fh-inode.m4 \
$(top_srcdir)/config/kernel-evict-inode.m4 \
$(top_srcdir)/config/kernel-fallocate.m4 \
$(top_srcdir)/config/kernel-file-dentry.m4 \
$(top_srcdir)/config/kernel-file-inode.m4 \
$(top_srcdir)/config/kernel-fmode-t.m4 \
$(top_srcdir)/config/kernel-follow-down-one.m4 \
$(top_srcdir)/config/kernel-fpu.m4 \
$(top_srcdir)/config/kernel-fst-mount.m4 \
$(top_srcdir)/config/kernel-fsync.m4 \
$(top_srcdir)/config/kernel-generic_io_acct.m4 \
$(top_srcdir)/config/kernel-generic_readlink.m4 \
$(top_srcdir)/config/kernel-get-disk-and-module.m4 \
$(top_srcdir)/config/kernel-get-disk-ro.m4 \
$(top_srcdir)/config/kernel-get-link.m4 \
$(top_srcdir)/config/kernel-global_page_state.m4 \
$(top_srcdir)/config/kernel-group-info.m4 \
$(top_srcdir)/config/kernel-in-compat-syscall.m4 \
$(top_srcdir)/config/kernel-inode-getattr.m4 \
$(top_srcdir)/config/kernel-inode-lock.m4 \
$(top_srcdir)/config/kernel-inode-set-flags.m4 \
$(top_srcdir)/config/kernel-inode-set-iversion.m4 \
$(top_srcdir)/config/kernel-inode-times.m4 \
$(top_srcdir)/config/kernel-insert-inode-locked.m4 \
$(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
$(top_srcdir)/config/kernel-is_owner_or_cap.m4 \
$(top_srcdir)/config/kernel-kmap-atomic-args.m4 \
$(top_srcdir)/config/kernel-kmem-cache.m4 \
$(top_srcdir)/config/kernel-ktime_get_coarse_real_ts64.m4 \
$(top_srcdir)/config/kernel-kuid-helpers.m4 \
$(top_srcdir)/config/kernel-kuidgid.m4 \
$(top_srcdir)/config/kernel-lookup-bdev.m4 \
$(top_srcdir)/config/kernel-lookup-nameidata.m4 \
$(top_srcdir)/config/kernel-lseek-execute.m4 \
$(top_srcdir)/config/kernel-misc-minor.m4 \
$(top_srcdir)/config/kernel-mk-request-fn.m4 \
$(top_srcdir)/config/kernel-mkdir-umode-t.m4 \
$(top_srcdir)/config/kernel-mod-param.m4 \
$(top_srcdir)/config/kernel-objtool.m4 \
$(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
$(top_srcdir)/config/kernel-pde-data.m4 \
$(top_srcdir)/config/kernel-put-link.m4 \
$(top_srcdir)/config/kernel-rename.m4 \
$(top_srcdir)/config/kernel-rw.m4 \
$(top_srcdir)/config/kernel-rwsem.m4 \
$(top_srcdir)/config/kernel-sched.m4 \
$(top_srcdir)/config/kernel-security-inode-init.m4 \
$(top_srcdir)/config/kernel-set-fs-pwd.m4 \
$(top_srcdir)/config/kernel-set-nlink.m4 \
$(top_srcdir)/config/kernel-setattr-prepare.m4 \
$(top_srcdir)/config/kernel-sget-args.m4 \
$(top_srcdir)/config/kernel-show-options.m4 \
$(top_srcdir)/config/kernel-shrink.m4 \
$(top_srcdir)/config/kernel-spinlock.m4 \
$(top_srcdir)/config/kernel-submit_bio.m4 \
$(top_srcdir)/config/kernel-super-userns.m4 \
$(top_srcdir)/config/kernel-timer.m4 \
$(top_srcdir)/config/kernel-tmpfile.m4 \
$(top_srcdir)/config/kernel-totalhigh_pages.m4 \
$(top_srcdir)/config/kernel-totalram-pages-func.m4 \
$(top_srcdir)/config/kernel-truncate-range.m4 \
$(top_srcdir)/config/kernel-truncate-setsize.m4 \
$(top_srcdir)/config/kernel-urange-sleep.m4 \
$(top_srcdir)/config/kernel-userns-capabilities.m4 \
$(top_srcdir)/config/kernel-vfs-direct_IO.m4 \
$(top_srcdir)/config/kernel-vfs-fsync.m4 \
$(top_srcdir)/config/kernel-vfs-getattr.m4 \
$(top_srcdir)/config/kernel-vfs-iterate.m4 \
$(top_srcdir)/config/kernel-vfs-rw-iterate.m4 \
$(top_srcdir)/config/kernel-wait.m4 \
$(top_srcdir)/config/kernel-xattr-handler.m4 \
$(top_srcdir)/config/kernel-zlib.m4 \
$(top_srcdir)/config/kernel.m4 $(top_srcdir)/config/lib-ld.m4 \
$(top_srcdir)/config/lib-link.m4 \
$(top_srcdir)/config/lib-prefix.m4 \
$(top_srcdir)/config/libtool.m4 \
$(top_srcdir)/config/ltoptions.m4 \
$(top_srcdir)/config/ltsugar.m4 \
$(top_srcdir)/config/ltversion.m4 \
$(top_srcdir)/config/lt~obsolete.m4 \
$(top_srcdir)/config/mount-helper.m4 \
$(top_srcdir)/config/nls.m4 $(top_srcdir)/config/pkg.m4 \
$(top_srcdir)/config/po.m4 $(top_srcdir)/config/progtest.m4 \
$(top_srcdir)/config/toolchain-simd.m4 \
$(top_srcdir)/config/user-dracut.m4 \
$(top_srcdir)/config/user-gettext.m4 \
$(top_srcdir)/config/user-libaio.m4 \
$(top_srcdir)/config/user-libblkid.m4 \
$(top_srcdir)/config/user-libexec.m4 \
$(top_srcdir)/config/user-libssl.m4 \
$(top_srcdir)/config/user-libtirpc.m4 \
$(top_srcdir)/config/user-libudev.m4 \
$(top_srcdir)/config/user-libuuid.m4 \
$(top_srcdir)/config/user-makedev.m4 \
$(top_srcdir)/config/user-runstatedir.m4 \
$(top_srcdir)/config/user-systemd.m4 \
$(top_srcdir)/config/user-sysvinit.m4 \
$(top_srcdir)/config/user-udev.m4 \
$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
$(top_srcdir)/config/zfs-build.m4 \
$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) $(am__extra_HEADERS_DIST) \
$(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = zfs_config.h
CONFIG_CLEAN_FILES = module/Makefile module/avl/Makefile \
module/nvpair/Makefile module/unicode/Makefile \
module/zcommon/Makefile module/zfs/Makefile \
module/lua/Makefile module/icp/Makefile module/spl/Makefile \
zfs.release
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__extra_HEADERS_DIST = zfs.release.in zfs_config.h.in
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
am__installdirs = "$(DESTDIR)$(extradir)" "$(DESTDIR)$(kerneldir)"
HEADERS = $(extra_HEADERS) $(nodist_kernel_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope distdir dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
$(LISP)zfs_config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DIST_SUBDIRS = include rpm udev etc man scripts lib tests cmd contrib \
module
am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config/deb.am \
$(srcdir)/config/rpm.am $(srcdir)/config/tgz.am \
$(srcdir)/zfs.release.in $(srcdir)/zfs_config.h.in \
$(top_srcdir)/config/compile $(top_srcdir)/config/config.guess \
$(top_srcdir)/config/config.rpath \
$(top_srcdir)/config/config.sub \
$(top_srcdir)/config/install-sh $(top_srcdir)/config/ltmain.sh \
$(top_srcdir)/config/missing $(top_srcdir)/module/Makefile.in \
$(top_srcdir)/module/avl/Makefile.in \
$(top_srcdir)/module/icp/Makefile.in \
$(top_srcdir)/module/lua/Makefile.in \
$(top_srcdir)/module/nvpair/Makefile.in \
$(top_srcdir)/module/spl/Makefile.in \
$(top_srcdir)/module/unicode/Makefile.in \
$(top_srcdir)/module/zcommon/Makefile.in \
$(top_srcdir)/module/zfs/Makefile.in AUTHORS NEWS \
config/compile config/config.guess config/config.rpath \
config/config.sub config/install-sh config/ltmain.sh \
config/missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
DIST_TARGETS = dist-gzip
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = ${SHELL} /root/src/zfs/zfs-0.8.0/config/missing aclocal-1.15
ALIEN = alien
ALIEN_VERSION = 8.95
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 0
AR = ar
ASAN_CFLAGS =
ASAN_ENABLED = no
ASAN_LDFLAGS =
ASAN_ZFS = _without_asan
AUTOCONF = ${SHELL} /root/src/zfs/zfs-0.8.0/config/missing autoconf
AUTOHEADER = ${SHELL} /root/src/zfs/zfs-0.8.0/config/missing autoheader
AUTOMAKE = ${SHELL} /root/src/zfs/zfs-0.8.0/config/missing automake-1.15
AWK = gawk
CC = gcc
CCAS = gcc
CCASDEPMODE = depmode=gcc3
CCASFLAGS = -g -O2
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2
CODE_COVERAGE_CFLAGS =
CODE_COVERAGE_CPPFLAGS =
CODE_COVERAGE_CXXFLAGS =
CODE_COVERAGE_ENABLED = no
CODE_COVERAGE_LDFLAGS =
CODE_COVERAGE_LIBS =
CPP = gcc -E
CPPFLAGS =
CYGPATH_W = echo
DEBUGINFO_ZFS = _without_debuginfo
DEBUG_CFLAGS =
DEBUG_CPPFLAGS = -UDEBUG -DNDEBUG
DEBUG_KMEM_TRACKING_ZFS = _without_debug_kmem_tracking
DEBUG_KMEM_ZFS = _without_debug_kmem
DEBUG_LDFLAGS =
DEBUG_ZFS = _without_debug
DEFAULT_INITCONF_DIR = /etc/default
DEFAULT_INIT_DIR = ${prefix}/etc/init.d
DEFAULT_INIT_SCRIPT = lsb
DEFAULT_PACKAGE = deb
DEFINE_INITRAMFS = --define "_initramfs 1"
DEFINE_PYTHON_PKG_VERSION =
DEFINE_PYTHON_VERSION =
DEFINE_PYZFS =
DEFINE_SYSTEMD = --with systemd --define "_unitdir $(systemdunitdir)" --define "_presetdir $(systemdpresetdir)" --define "_generatordir $(systemdgeneratordir)"
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = false
DPKG = dpkg
DPKGBUILD = dpkg-buildpackage
DPKGBUILD_VERSION = 1.19.0.5
DPKG_VERSION = 1.19.0.5
DSYMUTIL =
DUMPBIN =
ECHO_C =
ECHO_N = -n
ECHO_T =
EGREP = /bin/grep -E
EXEEXT =
FGREP = /bin/grep -F
FRAME_LARGER_THAN = -Wframe-larger-than=4096
GCOV =
GENHTML =
GETTEXT_MACRO_VERSION = 0.20
GMSGFMT = /usr/bin/msgfmt
GMSGFMT_015 = /usr/bin/msgfmt
GREP = /bin/grep
HAVE_ALIEN = yes
HAVE_DPKG = yes
HAVE_DPKGBUILD = yes
HAVE_RPM = yes
HAVE_RPMBUILD = yes
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
INTLLIBS =
INTL_MACOSX_LIBS =
KERNEL_DEBUG_CFLAGS =
KERNEL_DEBUG_CPPFLAGS = -UDEBUG -DNDEBUG
KERNEL_MAKE =
LCOV =
LD = /usr/bin/ld -m elf_x86_64
LDFLAGS =
LIBAIO = -laio
LIBBLKID = -lblkid
LIBICONV =
LIBINTL =
LIBOBJS =
LIBS = -ludev -luuid -lz
LIBSSL = -lssl -lcrypto
LIBTIRPC_CFLAGS =
LIBTIRPC_LIBS =
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBUDEV = -ludev
LIBUUID = -luuid
LINUX =
LINUX_OBJ =
LINUX_SYMBOLS =
LINUX_VERSION =
LIPO =
LN_S = ln -s
LTLIBICONV =
LTLIBINTL =
LTLIBOBJS =
LT_SYS_LIBRARY_PATH =
MAINT = #
MAKEINFO = ${SHELL} /root/src/zfs/zfs-0.8.0/config/missing makeinfo
MANIFEST_TOOL = :
MKDIR_P = /bin/mkdir -p
MSGFMT = /usr/bin/msgfmt
MSGMERGE = /usr/bin/msgmerge
MSGMERGE_FOR_MSGFMT_OPTION = --no-fuzzy-matching --no-location --quiet
MULTIARCH_LIBDIR = lib/x86_64-linux-gnu
NM = /usr/bin/nm -B
NMEDIT =
NO_BOOL_COMPARE = -Wno-bool-compare
NO_FORMAT_TRUNCATION = -Wno-format-truncation
NO_OMIT_FRAME_POINTER = -fno-omit-frame-pointer
NO_UNUSED_BUT_SET_VARIABLE = -Wno-unused-but-set-variable
OBJDUMP = objdump
OBJEXT = o
OTOOL =
OTOOL64 =
PACKAGE = zfs
PACKAGE_BUGREPORT =
PACKAGE_NAME = zfs
PACKAGE_STRING = zfs 0.8.0
PACKAGE_TARNAME = zfs
PACKAGE_URL =
PACKAGE_VERSION = 0.8.0
PATH_SEPARATOR = :
PKG_CONFIG =
PKG_CONFIG_LIBDIR =
PKG_CONFIG_PATH =
POSUB = po
PYTHON = /usr/bin/python3.6
PYTHON_CPPFLAGS = -I/usr/include/python3.6m
PYTHON_EXEC_PREFIX = ${exec_prefix}
PYTHON_EXTRA_LDFLAGS = -Xlinker -export-dynamic -Wl,-O1 -Wl,-Bsymbolic-functions
PYTHON_EXTRA_LIBS = -lpthread -ldl -lutil -lm
PYTHON_LIBS = -L/usr/lib -lpython3.6m
PYTHON_PLATFORM = linux
PYTHON_PREFIX = ${prefix}
PYTHON_SITE_PKG = /usr/lib/python3/dist-packages
PYTHON_VERSION = 3.6
PYZFS_ENABLED = yes
QAT_OBJ =
QAT_SRC =
QAT_SYMBOLS =
RANLIB = ranlib
RELEASE = 1
RM = rm -f
RPM = rpm
RPMBUILD = rpmbuild
RPMBUILD_VERSION = 4.14.1
RPM_DEFINE_COMMON = --define "$(DEBUG_ZFS) 1" --define "$(DEBUG_KMEM_ZFS) 1" --define "$(DEBUG_KMEM_TRACKING_ZFS) 1" --define "$(DEBUGINFO_ZFS) 1" --define "$(ASAN_ZFS) 1"
RPM_DEFINE_DKMS =
RPM_DEFINE_KMOD = --define "kernels $(LINUX_VERSION)" --define "ksrc $(LINUX)" --define "kobj $(LINUX_OBJ)" --define "_wrong_version_format_terminate_build 0"
RPM_DEFINE_UTIL = --define "_initconfdir $(DEFAULT_INITCONF_DIR)" $(DEFINE_INITRAMFS) $(DEFINE_SYSTEMD) $(DEFINE_PYZFS) $(DEFINE_PYTHON_VERSION) $(DEFINE_PYTHON_PKG_VERSION) --define "_lib $(MULTIARCH_LIBDIR)"
RPM_SPEC_DIR = rpm/generic
RPM_VERSION = 4.14.1
SED = /bin/sed
SET_MAKE =
SHELL = /bin/bash
SRPM_DEFINE_COMMON = --define "build_src_rpm 1"
SRPM_DEFINE_DKMS =
SRPM_DEFINE_KMOD =
SRPM_DEFINE_UTIL =
STRIP = strip
TARGET_ASM_DIR = asm-x86_64
USE_NLS = yes
VENDOR = ubuntu
VERSION = 0.8.0
XGETTEXT = /usr/bin/xgettext
XGETTEXT_015 = /usr/bin/xgettext
XGETTEXT_EXTRA_OPTIONS =
ZFS_CONFIG = user
ZFS_INIT_SYSTEMD = systemd
ZFS_INIT_SYSV = init.d
ZFS_META_ALIAS = zfs-0.8.0-1
ZFS_META_AUTHOR = OpenZFS on Linux
ZFS_META_DATA =
ZFS_META_LICENSE = CDDL
ZFS_META_LT_AGE =
ZFS_META_LT_CURRENT =
ZFS_META_LT_REVISION =
ZFS_META_NAME = zfs
ZFS_META_RELEASE = 1
ZFS_META_VERSION = 0.8.0
ZFS_MODULE_LOAD = modules-load.d
ZLIB = -lz
ZONENAME = echo global
abs_builddir = /root/src/zfs/zfs-0.8.0
abs_srcdir = /root/src/zfs/zfs-0.8.0
abs_top_builddir = /root/src/zfs/zfs-0.8.0
abs_top_srcdir = /root/src/zfs/zfs-0.8.0
ac_ct_AR = ar
ac_ct_CC = gcc
ac_ct_DUMPBIN =
am__include = include
am__leading_dot = .
am__quote =
am__tar = tar --format=posix -chf - "$$tardir"
am__untar = tar -xf -
bindir = ${exec_prefix}/bin
build = x86_64-pc-linux-gnu
build_alias =
build_cpu = x86_64
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dracutdir = /usr/lib/dracut
dvidir = ${docdir}
exec_prefix = ${prefix}
host = x86_64-pc-linux-gnu
host_alias =
host_cpu = x86_64
host_os = linux-gnu
host_vendor = pc
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /root/src/zfs/zfs-0.8.0/config/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = $(MKDIR_P)
modulesloaddir = /usr/lib/modules-load.d
mounthelperdir = /sbin
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgpyexecdir = ${pyexecdir}/zfs
pkgpythondir = ${pythondir}/zfs
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
pyexecdir = ${exec_prefix}/lib/python3.6/site-packages
pythondir = ${prefix}/lib/python3.6/site-packages
pythonsitedir = /usr/lib/python3/dist-packages
runstatedir = ${localstatedir}/run
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
systemdgeneratordir = /usr/lib/systemd/system-generators
systemdpresetdir = /usr/lib/systemd/system-preset
systemdunitdir = /usr/lib/systemd/system
target = x86_64-pc-linux-gnu
target_alias =
target_cpu = x86_64
target_os = linux-gnu
target_vendor = pc
top_build_prefix =
top_builddir = .
top_srcdir = .
udevdir = /lib/udev
udevruledir = /lib/udev/rules.d
zfsexecdir = ${exec_prefix}/libexec/zfs
ACLOCAL_AMFLAGS = -I config
SUBDIRS = include rpm $(am__append_1) $(am__append_2)
#extradir = $(prefix)/src/zfs-$(VERSION)
#extra_HEADERS = zfs.release.in zfs_config.h.in
#kerneldir = $(prefix)/src/zfs-$(VERSION)/$(LINUX_VERSION)
#nodist_kernel_HEADERS = zfs.release zfs_config.h module/$(LINUX_SYMBOLS)
AUTOMAKE_OPTIONS = foreign
# Include all the extra licensing information for modules
EXTRA_DIST = autogen.sh copy-builtin config/config.awk config/rpm.am \
config/deb.am config/tgz.am META AUTHORS COPYRIGHT LICENSE \
NEWS NOTICE README.md CODE_OF_CONDUCT.md \
module/icp/algs/skein/THIRDPARTYLICENSE \
module/icp/algs/skein/THIRDPARTYLICENSE.descrip \
module/icp/asm-x86_64/aes/THIRDPARTYLICENSE.gladman \
module/icp/asm-x86_64/aes/THIRDPARTYLICENSE.gladman.descrip \
module/icp/asm-x86_64/aes/THIRDPARTYLICENSE.openssl \
module/icp/asm-x86_64/aes/THIRDPARTYLICENSE.openssl.descrip \
module/spl/THIRDPARTYLICENSE.gplv2 \
module/spl/THIRDPARTYLICENSE.gplv2.descrip \
module/zfs/THIRDPARTYLICENSE.cityhash \
module/zfs/THIRDPARTYLICENSE.cityhash.descrip
BUILT_SOURCES = gitrev
all: $(BUILT_SOURCES) zfs_config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(srcdir)/config/rpm.am $(srcdir)/config/deb.am $(srcdir)/config/tgz.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(srcdir)/config/rpm.am $(srcdir)/config/deb.am $(srcdir)/config/tgz.am $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: # $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
zfs_config.h: stamp-h1
@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/zfs_config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status zfs_config.h
$(srcdir)/zfs_config.h.in: # $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f zfs_config.h stamp-h1
module/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/avl/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/avl/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/nvpair/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/nvpair/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/unicode/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/unicode/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/zcommon/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zcommon/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/zfs/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zfs/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/lua/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/lua/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/icp/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/icp/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/spl/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/spl/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
zfs.release: $(top_builddir)/config.status $(srcdir)/zfs.release.in
cd $(top_builddir) && $(SHELL) ./config.status $@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool config.lt
install-extraHEADERS: $(extra_HEADERS)
@$(NORMAL_INSTALL)
@list='$(extra_HEADERS)'; test -n "$(extradir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(extradir)'"; \
$(MKDIR_P) "$(DESTDIR)$(extradir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(extradir)'"; \
$(INSTALL_HEADER) $$files "$(DESTDIR)$(extradir)" || exit $$?; \
done
uninstall-extraHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(extra_HEADERS)'; test -n "$(extradir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(extradir)'; $(am__uninstall_files_from_dir)
install-nodist_kernelHEADERS: $(nodist_kernel_HEADERS)
@$(NORMAL_INSTALL)
@list='$(nodist_kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(kerneldir)'"; \
$(MKDIR_P) "$(DESTDIR)$(kerneldir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(kerneldir)'"; \
$(INSTALL_HEADER) $$files "$(DESTDIR)$(kerneldir)" || exit $$?; \
done
uninstall-nodist_kernelHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(nodist_kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(kerneldir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-tarZ: distdir
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build/sub \
&& ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
--srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(HEADERS) zfs_config.h all-local
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(extradir)" "$(DESTDIR)$(kerneldir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
install-data-hook:
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
distclean-libtool distclean-local distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-extraHEADERS install-nodist_kernelHEADERS
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-extraHEADERS uninstall-nodist_kernelHEADERS
.MAKE: $(am__recursive_targets) all check install install-am \
install-data-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
am--refresh check check-am clean clean-cscope clean-generic \
clean-libtool cscope cscopelist-am ctags ctags-am dist \
dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
dist-tarZ dist-xz dist-zip distcheck distclean \
distclean-generic distclean-hdr distclean-libtool \
distclean-local distclean-tags distcleancheck distdir \
distuninstallcheck dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am \
install-data-hook install-dvi install-dvi-am install-exec \
install-exec-am install-extraHEADERS install-html \
install-html-am install-info install-info-am install-man \
install-nodist_kernelHEADERS install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am uninstall-extraHEADERS \
uninstall-nodist_kernelHEADERS
.PRECIOUS: Makefile
srpm-kmod:
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-kmod" \
def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_KMOD}' srpm-common
srpm-dkms:
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-dkms" \
def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_DKMS}' srpm-common
srpm-utils:
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" \
def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_UTIL}' srpm-common
srpm: srpm-kmod srpm-dkms srpm-utils
srpms: srpm-kmod srpm-dkms srpm-utils
rpm-kmod: srpm-kmod
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-kmod" \
def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_KMOD}' rpm-common
rpm-dkms: srpm-dkms
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-dkms" \
def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_DKMS}' rpm-common
rpm-utils: srpm-utils
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" \
def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_UTIL}' rpm-common
rpm: rpm-kmod rpm-dkms rpm-utils
rpms: rpm-kmod rpm-dkms rpm-utils
rpm-local:
@(if test "${HAVE_RPMBUILD}" = "no"; then \
echo -e "\n" \
"*** Required util ${RPMBUILD} missing. Please install the\n" \
"*** package for your distribution which provides ${RPMBUILD},\n" \
"*** re-run configure, and try again.\n"; \
exit 1; \
fi; \
mkdir -p $(rpmbuild)/TMP && \
mkdir -p $(rpmbuild)/BUILD && \
mkdir -p $(rpmbuild)/RPMS && \
mkdir -p $(rpmbuild)/SRPMS && \
mkdir -p $(rpmbuild)/SPECS && \
cp ${RPM_SPEC_DIR}/$(rpmspec) $(rpmbuild)/SPECS && \
mkdir -p $(rpmbuild)/SOURCES && \
cp $(top_srcdir)/scripts/kmodtool $(rpmbuild)/SOURCES && \
cp $(distdir).tar.gz $(rpmbuild)/SOURCES)
srpm-common: dist
@(dist=`$(RPM) --eval %{?dist}`; \
rpmpkg=$(pkg)-$(VERSION)-$(RELEASE)$$dist*src.rpm; \
rpmspec=$(pkg).spec; \
rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \
$(MAKE) $(AM_MAKEFLAGS) \
rpmbuild="$$rpmbuild" \
rpmspec="$$rpmspec" \
rpm-local || exit 1; \
LANG=C $(RPMBUILD) \
--define "_tmppath $$rpmbuild/TMP" \
--define "_topdir $$rpmbuild" \
$(def) -bs $$rpmbuild/SPECS/$$rpmspec || exit 1; \
cp $$rpmbuild/SRPMS/$$rpmpkg . || exit 1; \
rm -R $$rpmbuild)
rpm-common:
@(dist=`$(RPM) --eval %{?dist}`; \
rpmpkg=$(pkg)-$(VERSION)-$(RELEASE)$$dist*src.rpm; \
rpmspec=$(pkg).spec; \
rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \
$(MAKE) $(AM_MAKEFLAGS) \
rpmbuild="$$rpmbuild" \
rpmspec="$$rpmspec" \
rpm-local || exit 1; \
LANG=C ${RPMBUILD} \
--define "_tmppath $$rpmbuild/TMP" \
--define "_topdir $$rpmbuild" \
$(def) --rebuild $$rpmpkg || exit 1; \
cp $$rpmbuild/RPMS/*/* . || exit 1; \
rm -R $$rpmbuild)
deb-local:
@(if test "${HAVE_DPKGBUILD}" = "no"; then \
echo -e "\n" \
"*** Required util ${DPKGBUILD} missing. Please install the\n" \
"*** package for your distribution which provides ${DPKGBUILD},\n" \
"*** re-run configure, and try again.\n"; \
exit 1; \
fi; \
if test "${HAVE_ALIEN}" = "no"; then \
echo -e "\n" \
"*** Required util ${ALIEN} missing. Please install the\n" \
"*** package for your distribution which provides ${ALIEN},\n" \
"*** re-run configure, and try again.\n"; \
exit 1; \
fi)
deb-kmod: deb-local rpm-kmod
name=${PACKAGE}; \
version=${VERSION}-${RELEASE}; \
arch=`$(RPM) -qp $${name}-kmod-$${version}.src.rpm --qf %{arch} | tail -1`; \
debarch=`$(DPKG) --print-architecture`; \
pkg1=kmod-$${name}*$${version}.$${arch}.rpm; \
fakeroot $(ALIEN) --bump=0 --scripts --to-deb --target=$$debarch $$pkg1; \
$(RM) $$pkg1
deb-dkms: deb-local rpm-dkms
name=${PACKAGE}; \
version=${VERSION}-${RELEASE}; \
arch=`$(RPM) -qp $${name}-dkms-$${version}.src.rpm --qf %{arch} | tail -1`; \
debarch=`$(DPKG) --print-architecture`; \
pkg1=$${name}-dkms-$${version}.$${arch}.rpm; \
fakeroot $(ALIEN) --bump=0 --scripts --to-deb --target=$$debarch $$pkg1; \
$(RM) $$pkg1
deb-utils: deb-local rpm-utils
name=${PACKAGE}; \
version=${VERSION}-${RELEASE}; \
arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
debarch=`$(DPKG) --print-architecture`; \
pkg1=$${name}-$${version}.$${arch}.rpm; \
pkg2=libnvpair1-$${version}.$${arch}.rpm; \
pkg3=libuutil1-$${version}.$${arch}.rpm; \
pkg4=libzfs2-$${version}.$${arch}.rpm; \
pkg5=libzpool2-$${version}.$${arch}.rpm; \
pkg6=libzfs2-devel-$${version}.$${arch}.rpm; \
pkg7=$${name}-test-$${version}.$${arch}.rpm; \
pkg8=$${name}-dracut-$${version}.$${arch}.rpm; \
pkg9=$${name}-initramfs-$${version}.$${arch}.rpm; \
pkg10=`ls python*-pyzfs-$${version}* | tail -1`; \
path_prepend=`mktemp -d /tmp/intercept.XXX`; \
echo "#$(SHELL)" > $${path_prepend}/dh_shlibdeps; \
echo "`which dh_shlibdeps` -- \
-xlibuutil1linux -xlibnvpair1linux -xlibzfs2linux -xlibzpool2linux" \
>> $${path_prepend}/dh_shlibdeps; \
chmod +x $${path_prepend}/dh_shlibdeps; \
env PATH=$${path_prepend}:$${PATH} \
fakeroot $(ALIEN) --bump=0 --scripts --to-deb --target=$$debarch \
$$pkg1 $$pkg2 $$pkg3 $$pkg4 $$pkg5 $$pkg6 $$pkg7 \
$$pkg8 $$pkg9 $$pkg10; \
$(RM) $${path_prepend}/dh_shlibdeps; \
rmdir $${path_prepend}; \
$(RM) $$pkg1 $$pkg2 $$pkg3 $$pkg4 $$pkg5 $$pkg6 $$pkg7 \
$$pkg8 $$pkg9 $$pkg10;
deb: deb-kmod deb-dkms deb-utils
tgz-local:
@(if test "${HAVE_ALIEN}" = "no"; then \
echo -e "\n" \
"*** Required util ${ALIEN} missing. Please install the\n" \
"*** package for your distribution which provides ${ALIEN},\n" \
"*** re-run configure, and try again.\n"; \
exit 1; \
fi)
tgz-kmod: tgz-local rpm-kmod
# name=${PACKAGE}; \
# version=${VERSION}-${RELEASE}; \
# arch=`$(RPM) -qp $${name}-kmod-$${version}.src.rpm --qf %{arch} | tail -1`; \
# pkg1=kmod-$${name}*$${version}.$${arch}.rpm; \
# fakeroot $(ALIEN) --scripts --to-tgz $$pkg1; \
# $(RM) $$pkg1
tgz-utils: tgz-local rpm-utils
name=${PACKAGE}; \
version=${VERSION}-${RELEASE}; \
arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
pkg1=$${name}-$${version}.$${arch}.rpm; \
pkg2=$${name}-devel-$${version}.$${arch}.rpm; \
pkg3=$${name}-test-$${version}.$${arch}.rpm; \
fakeroot $(ALIEN) --scripts --to-tgz $$pkg1 $$pkg2 $$pkg3; \
$(RM) $$pkg1 $$pkg2 $$pkg3
tgz: tgz-kmod tgz-utils
# Code coverage
#
# Optional:
# - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting.
# Multiple directories may be specified, separated by whitespace.
# (Default: $(top_builddir))
# - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated
# by lcov for code coverage. (Default:
# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info)
# - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage
# reports to be created. (Default:
# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage)
# - CODE_COVERAGE_BRANCH_COVERAGE: Set to 1 to enforce branch coverage,
# set to 0 to disable it and leave empty to stay with the default.
# (Default: empty)
# - CODE_COVERAGE_LCOV_SHOPTS_DEFAULT: Extra options shared between both lcov
# instances. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE)
# - CODE_COVERAGE_LCOV_SHOPTS: Extra options to shared between both lcov
# instances. (Default: $CODE_COVERAGE_LCOV_SHOPTS_DEFAULT)
# - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov
# - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the
# collecting lcov instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)
# - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the collecting lcov
# instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)
# - CODE_COVERAGE_LCOV_RMOPTS_DEFAULT: Extra options to pass to the filtering
# lcov instance. (Default: empty)
# - CODE_COVERAGE_LCOV_RMOPTS: Extra options to pass to the filtering lcov
# instance. (Default: $CODE_COVERAGE_LCOV_RMOPTS_DEFAULT)
# - CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT: Extra options to pass to the
# genhtml instance. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE)
# - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml
# instance. (Default: $CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT)
# - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore
#
# The generated report will be titled using the $(PACKAGE_NAME) and
# $(PACKAGE_VERSION). In order to add the current git hash to the title,
# use the git-version-gen script, available online.
# Optional variables
CODE_COVERAGE_DIRECTORY ?= $(top_builddir)
CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info
CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage
CODE_COVERAGE_BRANCH_COVERAGE ?=
CODE_COVERAGE_LCOV_SHOPTS_DEFAULT ?= $(if $(CODE_COVERAGE_BRANCH_COVERAGE),\
--rc lcov_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE))
CODE_COVERAGE_LCOV_SHOPTS ?= $(CODE_COVERAGE_LCOV_SHOPTS_DEFAULT)
CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool "$(GCOV)"
CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= $(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)
CODE_COVERAGE_LCOV_OPTIONS ?= $(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)
CODE_COVERAGE_LCOV_RMOPTS_DEFAULT ?=
CODE_COVERAGE_LCOV_RMOPTS ?= $(CODE_COVERAGE_LCOV_RMOPTS_DEFAULT)
CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT ?=\
$(if $(CODE_COVERAGE_BRANCH_COVERAGE),\
--rc genhtml_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE))
CODE_COVERAGE_GENHTML_OPTIONS ?= $(CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT)
CODE_COVERAGE_IGNORE_PATTERN ?=
GITIGNOREFILES ?=
GITIGNOREFILES += $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY)
code_coverage_v_lcov_cap = $(code_coverage_v_lcov_cap_$(V))
code_coverage_v_lcov_cap_ = $(code_coverage_v_lcov_cap_$(AM_DEFAULT_VERBOSITY))
code_coverage_v_lcov_cap_0 = @echo " LCOV --capture"\
$(CODE_COVERAGE_OUTPUT_FILE);
code_coverage_v_lcov_ign = $(code_coverage_v_lcov_ign_$(V))
code_coverage_v_lcov_ign_ = $(code_coverage_v_lcov_ign_$(AM_DEFAULT_VERBOSITY))
code_coverage_v_lcov_ign_0 = @echo " LCOV --remove /tmp/*"\
$(CODE_COVERAGE_IGNORE_PATTERN);
code_coverage_v_genhtml = $(code_coverage_v_genhtml_$(V))
code_coverage_v_genhtml_ = $(code_coverage_v_genhtml_$(AM_DEFAULT_VERBOSITY))
code_coverage_v_genhtml_0 = @echo " GEN " $(CODE_COVERAGE_OUTPUT_DIRECTORY);
code_coverage_quiet = $(code_coverage_quiet_$(V))
code_coverage_quiet_ = $(code_coverage_quiet_$(AM_DEFAULT_VERBOSITY))
code_coverage_quiet_0 = --quiet
# sanitizes the test-name: replaces with underscores: dashes and dots
code_coverage_sanitize = $(subst -,_,$(subst .,_,$(1)))
# Use recursive makes in order to ignore errors during check
check-code-coverage:
@echo "Need to reconfigure with --enable-code-coverage"
# Capture code coverage data
code-coverage-capture: code-coverage-capture-hook
@echo "Need to reconfigure with --enable-code-coverage"
# Hook rule executed before code-coverage-capture, overridable by the user
code-coverage-capture-hook:
AM_DISTCHECK_CONFIGURE_FLAGS ?=
AM_DISTCHECK_CONFIGURE_FLAGS += --disable-code-coverage
.PHONY: check-code-coverage code-coverage-capture code-coverage-capture-hook code-coverage-clean
.PHONY: gitrev
gitrev:
-${top_srcdir}/scripts/make_gitrev.sh
distclean-local::
-$(RM) -R autom4te*.cache
-find . \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \
-o -name .pc -o -name .hg -o -name .git \) -prune -o \
\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
-o -name '.*.rej' -o -size 0 -o -name '*%' -o -name '.*.cmd' \
-o -name 'core' -o -name 'Makefile' -o -name 'Module.symvers' \
-o -name '*.order' -o -name '*.markers' -o -name '*.gcda' \
-o -name '*.gcno' \) \
-type f -print | xargs $(RM)
all-local:
-${top_srcdir}/scripts/zfs-tests.sh -c
dist-hook: gitrev
cp ${top_srcdir}/include/zfs_gitrev.h $(distdir)/include; \
sed -i 's/Release:[[:print:]]*/Release: $(RELEASE)/' \
$(distdir)/META
# For compatibility, create a matching spl-x.y.z directly which contains
# symlinks to the updated header and object file locations. These
# compatibility links will be removed in the next major release.
#install-data-hook:
# rm -rf $(DESTDIR)$(prefix)/src/spl-$(VERSION) && \
# mkdir $(DESTDIR)$(prefix)/src/spl-$(VERSION) && \
# cd $(DESTDIR)$(prefix)/src/spl-$(VERSION) && \
# ln -s ../zfs-$(VERSION)/include/spl include && \
# ln -s ../zfs-$(VERSION)/$(LINUX_VERSION) $(LINUX_VERSION) && \
# ln -s ../zfs-$(VERSION)/zfs_config.h.in spl_config.h.in && \
# ln -s ../zfs-$(VERSION)/zfs.release.in spl.release.in && \
# cd $(DESTDIR)$(prefix)/src/zfs-$(VERSION)/$(LINUX_VERSION) && \
# ln -fs zfs_config.h spl_config.h && \
# ln -fs zfs.release spl.release
codecheck: cstyle shellcheck flake8 mancheck testscheck vcscheck
checkstyle: codecheck commitcheck
commitcheck:
@if git rev-parse --git-dir > /dev/null 2>&1; then \
${top_srcdir}/scripts/commitcheck.sh; \
fi
cstyle:
@find ${top_srcdir} -name '*.[hc]' ! -name 'zfs_config.*' \
! -name '*.mod.c' -type f \
-exec ${top_srcdir}/scripts/cstyle.pl -cpP {} \+
shellcheck:
@if type shellcheck > /dev/null 2>&1; then \
shellcheck --exclude=SC1090 --format=gcc \
$$(find ${top_srcdir}/scripts/*.sh -type f) \
$$(find ${top_srcdir}/cmd/zed/zed.d/*.sh -type f) \
$$(find ${top_srcdir}/cmd/zpool/zpool.d/* -executable); \
else \
echo "skipping shellcheck because shellcheck is not installed"; \
fi
mancheck:
@if type mandoc > /dev/null 2>&1; then \
find ${top_srcdir}/man/man8 -type f -name 'zfs.8' \
-o -name 'zpool.8' -o -name 'zdb.8' \
-o -name 'zgenhostid.8' | \
xargs mandoc -Tlint -Werror; \
else \
echo "skipping mancheck because mandoc is not installed"; \
fi
testscheck:
@find ${top_srcdir}/tests/zfs-tests/tests -type f \
\( -name '*.ksh' -not -executable \) -o \
\( -name '*.kshlib' -executable \) -o \
\( -name '*.cfg' -executable \) | \
xargs -r stat -c '%A %n' | \
awk '{c++; print} END {if(c>0) exit 1}'
vcscheck:
@if git rev-parse --git-dir > /dev/null 2>&1; then \
git ls-files . --exclude-standard --others | \
awk '{c++; print} END {if(c>0) exit 1}' ; \
fi
lint: cppcheck paxcheck
cppcheck:
@if type cppcheck > /dev/null 2>&1; then \
cppcheck --quiet --force --error-exitcode=2 --inline-suppr \
--suppressions-list=.github/suppressions.txt \
-UHAVE_SSE2 -UHAVE_AVX512F -UHAVE_UIO_ZEROCOPY \
${top_srcdir}; \
else \
echo "skipping cppcheck because cppcheck is not installed"; \
fi
paxcheck:
@if type scanelf > /dev/null 2>&1; then \
${top_srcdir}/scripts/paxcheck.sh ${top_srcdir}; \
else \
echo "skipping paxcheck because scanelf is not installed"; \
fi
flake8:
@if type flake8 > /dev/null 2>&1; then \
flake8 ${top_srcdir}; \
else \
echo "skipping flake8 because flake8 is not installed"; \
fi
ctags:
$(RM) tags
find $(top_srcdir) -name .git -prune -o -name '*.[hc]' | xargs ctags
etags:
$(RM) TAGS
find $(top_srcdir) -name .pc -prune -o -name '*.[hc]' | xargs etags -a
tags: ctags etags
pkg: deb
pkg-dkms: deb-dkms
pkg-kmod: deb-kmod
pkg-utils: deb-utils
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: