usl-mm/README.md

__Features:__

setup-usl-mm_install_requirements ->
configure main and universe repo in sources.list,
install dialog utility

setup-usl-mm
1. Pre-reboot script ->
install zfs-utils and disable zpool auto-scrub,
change timezone to Prague,
crypt swap partition with ecryptfs-utils,
crypt some partition with dmcrypt to use with /var/snap/lxd/common/lxd/* and LXD ZFS storage,
add some config to sysctl.conf,
disable snapd.lxd service,
delete everything in /var/snap/lxd/common/lxd/*,
delete netplan, install ifupdown,
configure bridged networking (you can put LXD container to your network simple by add br0 to container),
create zpool with ashift=12,
set compression=on on crypted zpool,
configure zfs cache min 256MB max 1536MB,
do dist-upgrade,
create /root/onstart script to decrypt crypted parition with password and start lxd (you need start this script on every reboot),
reboot

2. Post-reboot script ->
for sure, stop snapd.lxd service and delete everything in /var/snap/lxd/common/lxd/*,
exec /root/onstart to decrypt partition and import zpool,
configure LXD to use encrypted partition as storage,
add some config to /root/.screenrc (for gnuscreen utility),
install htop mc zfsnap smartmontools and screen


__Requirements:__

Fresh installation of Ubuntu 19.04, swap partition and some paritition to crypted data


__THE PROGRAM IS DISTRIBUTED IN THE HOPE THAT IT WILL BE USEFUL, BUT WITHOUT ANY WARRANTY. IT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.__

__IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW THE AUTHOR WILL BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.__
first 2018-09-02 13:01:37 +02:00			`__Features:__`

			`setup-usl-mm_install_requirements ->`
			`configure main and universe repo in sources.list,`
			`install dialog utility`

			`setup-usl-mm`
			`1. Pre-reboot script ->`
Disable zfs auto-scrub 2018-11-11 20:43:32 +01:00			`install zfs-utils and disable zpool auto-scrub,`
first 2018-09-02 13:01:37 +02:00			`change timezone to Prague,`
			`crypt swap partition with ecryptfs-utils,`
disco 2019-04-17 15:14:29 +02:00			`crypt some partition with dmcrypt to use with /var/snap/lxd/common/lxd/* and LXD ZFS storage,`
first 2018-09-02 13:01:37 +02:00			`add some config to sysctl.conf,`
disco 2019-04-17 15:14:29 +02:00			`disable snapd.lxd service,`
			`delete everything in /var/snap/lxd/common/lxd/*,`
first 2018-09-02 13:01:37 +02:00			`delete netplan, install ifupdown,`
			`configure bridged networking (you can put LXD container to your network simple by add br0 to container),`
			`create zpool with ashift=12,`
			`set compression=on on crypted zpool,`
zfs_cache_edit 2018-11-12 18:32:08 +01:00			`configure zfs cache min 256MB max 1536MB,`
first 2018-09-02 13:01:37 +02:00			`do dist-upgrade,`
			`create /root/onstart script to decrypt crypted parition with password and start lxd (you need start this script on every reboot),`
			`reboot`

			`2. Post-reboot script ->`
disco 2019-04-17 15:14:29 +02:00			`for sure, stop snapd.lxd service and delete everything in /var/snap/lxd/common/lxd/*,`
first 2018-09-02 13:01:37 +02:00			`exec /root/onstart to decrypt partition and import zpool,`
			`configure LXD to use encrypted partition as storage,`
			`add some config to /root/.screenrc (for gnuscreen utility),`
smartmontools_add 2018-09-03 23:53:10 +02:00			`install htop mc zfsnap smartmontools and screen`
first 2018-09-02 13:01:37 +02:00

			`__Requirements:__`

disco 2019-04-17 15:14:29 +02:00			`Fresh installation of Ubuntu 19.04, swap partition and some paritition to crypted data`
first 2018-09-02 13:01:37 +02:00


			`__THE PROGRAM IS DISTRIBUTED IN THE HOPE THAT IT WILL BE USEFUL, BUT WITHOUT ANY WARRANTY. IT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.__`

			`__IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW THE AUTHOR WILL BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.__`