usl-mm/setup-usl-mm

#!/bin/bash

pre_reboot_script () {

pass_var=$(dialog --passwordbox "Enter password to crypted partition for containers:" 25 25  --output-fd 1)
pass_var2=$(dialog --passwordbox "Enter password to crypted partition for containers again:" 25 25  --output-fd 1)

if [ "$pass_var" == "$pass_var2" ]; then
	echo "Passwords match!"
else
	echo "Passwords not match!"
exit 1
fi

echo "Install net-tools"
apt install net-tools -y

echo "Exec ifconfig"
ifconfig
read -p "Enter interface for configure bridge:" NET_IF

echo "Starting lsblk"
lsblk
read -p "Enter partition to encrypt:" PARTITION

echo "Installing requirements"
apt install cryptsetup ecryptfs-utils zfsutils-linux -y

echo "Setting timezone to Prague"
timedatectl set-timezone Europe/Prague

echo "Starting ecryptfs-setup-swap"
ecryptfs-setup-swap -f

echo "Starting luksFormat"
echo -n "$pass_var" | cryptsetup luksFormat $PARTITION -

echo "Opening crypted partition"
echo "$pass_var" | cryptsetup open $PARTITION crypt -c -

echo "Creating zpool"
zpool create crypt /dev/mapper/crypt -o ashift=12

echo "Enabling compression on zpool"
zfs set compression=on crypt

echo "Creating datasets crypt/lxd/dir crypt/lxd/storage"
zfs create crypt/lxd
zfs create crypt/lxd/dir
zfs create crypt/lxd/storage

echo "Switch to 3.0 LXD version"
snap switch --channel 3.0/stable lxd
snap refresh

echo "Disabling lxd snap"
snap disable lxd

echo "Deleting everything in /var/snap/lxd/common/lxd/*"
rm /var/snap/lxd/common/lxd/* -r

echo "Creating mountpoint /var/snap/lxd/common/lxd to crypt/lxd/dir"
zfs set mountpoint=/var/snap/lxd/common/lxd crypt/lxd/dir

echo "Configuring sysctl"
echo "vm.swappiness = 1" > /etc/sysctl.d/50-usl-mm.conf
echo "vm.min_free_kbytes = 131072" >> /etc/sysctl.d/50-usl-mm.conf
echo "vm.dirty_background_ratio = 5" >> /etc/sysctl.d/50-usl-mm.conf
echo "fs.inotify.max_queued_events = 1048576" >> /etc/sysctl.d/50-usl-mm.conf
echo "fs.inotify.max_user_instances = 1048576" >> /etc/sysctl.d/50-usl-mm.conf
echo "fs.inotify.max_user_watches = 1048576" >> /etc/sysctl.d/50-usl-mm.conf
echo "kernel.dmesg_restrict = 1" >> /etc/sysctl.d/50-usl-mm.conf

echo "Configuring arc cache for zfs to min 256MB and max 1536MB + txg_timeout to 3"
echo "options zfs zfs_arc_min=268435456" > /etc/modprobe.d/zfs.conf
echo "options zfs zfs_arc_max=1610612736" >> /etc/modprobe.d/zfs.conf
echo "options zfs zfs_txg_timeout=3" >> /etc/modprobe.d/zfs.conf

echo "Doing update-initramfs -u"
update-initramfs -u

echo "Configuring network to use bridge"
echo "auto lo" > /etc/network/interfaces
echo "iface lo inet loopback" >> /etc/network/interfaces
echo " " >> /etc/network/interfaces
echo "iface $NET_IF inet manual" >> /etc/network/interfaces
echo "iface $NET_IF inet6 manual" >> /etc/network/interfaces
echo "auto br0" >> /etc/network/interfaces
echo "iface br0 inet dhcp" >> /etc/network/interfaces
echo "    bridge_ports $NET_IF" >> /etc/network/interfaces
echo "    bridge_stp off" >> /etc/network/interfaces
echo "    bridge_fd 0" >> /etc/network/interfaces
echo " " >> /etc/network/interfaces
echo "iface br0 inet6 auto" >> /etc/network/interfaces
echo "    bridge_ports $NET_IF" >> /etc/network/interfaces
echo "    bridge_stp off" >> /etc/network/interfaces
echo "    bridge_fd 0" >> /etc/network/interfaces

echo "Add DNS to systemd-resolved"
echo "[Resolve]" > /etc/systemd/resolved.conf
echo "DNS=8.8.8.8" >> /etc/systemd/resolved.conf
echo "FallbackDNS=1.1.1.1" >> /etc/systemd/resolved.conf

echo "Purging netplan,disabling dhcpcd and install ifupdown"
apt purge nplan -y
rm /etc/netplan/* -f
apt install bridge-utils ifupdown -y

echo "Doing apt update and apt dist-upgrade"
apt update
apt dist-upgrade -y

echo "Creating onstart script in /root"
echo "#!/bin/bash" > /root/onstart
echo "read -p \"Press any button to start...\"" >> /root/onstart
echo "pass_var=\$(dialog --passwordbox \"Enter password:\" 25 25  --output-fd 1)" >> /root/onstart
echo "pass_var2=\$(dialog --passwordbox \"Enter password again:\" 25 25  --output-fd 1)" >> /root/onstart
echo "if [ \"\$pass_var\" == \"\$pass_var2\" ]; then" >> /root/onstart
echo "echo \"Passwords match!\""  >> /root/onstart
echo "else"  >> /root/onstart
echo "echo \"Passwords not match!\"" >> /root/onstart
echo "exit 1" >> /root/onstart
echo "fi"  >> /root/onstart
echo "echo \"Stopping LXD snap daemon and deleting /var/snap/lxd/common/lxd/*\"" >> /root/onstart
echo "snap disable lxd" >> /root/onstart
echo "rm /var/snap/lxd/common/lxd/* -rf" >> /root/onstart
echo "echo \"Opening encrypted partition\"" >> /root/onstart
echo "echo \$pass_var | cryptsetup open $PARTITION crypt -c -" >> /root/onstart
echo "partprobe" >> /root/onstart
echo "zpool import -d /dev/mapper crypt -f -m" >> /root/onstart
echo "snap enable lxd" >> /root/onstart

chmod +x /root/onstart
read -p "Press any key for reboot"
reboot
}

post_reboot_script () {
echo "Disabling lxd and delete /var/snap/lxd/common/lxd/*"
snap disable lxd
rm /var/snap/lxd/common/lxd/* -r

echo "Executing /root/onstart"
bash /root/onstart

echo "Configuring LXD"
lxd waitready
cat <<EOF | lxd init
no
yes
storage
zfs
no
crypt/lxd/storage
no
yes
lxdbr0
10.10.10.1/24
yes
none
no
no
no
EOF

echo "Set screen settings"
echo "startup_message off" >> /root/.screenrc
echo "screen -t htop htop" >> /root/.screenrc
echo "screen -t mc mc" >> /root/.screenrc
echo "screen -t bash bash" >> /root/.screenrc
echo "altscreen on" >> /root/.screenrc
echo "term screen-256color" >> /root/.screenrc
echo "bind 'b' prev" >> /root/.screenrc
echo "bind 'n' next" >> /root/.screenrc
echo "hardstatus alwayslastline" >> /root/.screenrc
echo "autodetach on" >> /root/.screenrc
echo "mousetrack on" >> /root/.screenrc
echo "vbell off" >> /root/.screenrc
echo "termcapinfo xterm* ti@:te@" >> /root/.screenrc
echo "defscrollback 5000" >> /root/.screenrc
echo "scrollback 5000" >> /root/.screenrc
echo "hardstatus string \"%{=b kw} %?%-Lw%?%{=br kw}[%n %t]%{=b kw}%?%+Lw%? %= %c\"" >> /root/.screenrc

echo "Install utilities"
apt install -y mc htop screen zfsnap smartmontools pv

echo "Setting-up wireguard"
apt update
apt install wireguard -y
lxc profile set default linux.kernel_modules wireguard

echo "Set max processes to 1500 in default profile in LXD"
lxc profile set default limits.processes 1500

read -p "Done, press any key to return to main menu"
main_menu
}

install_uptrack () {
cd /tmp
wget https://ksplice.oracle.com/uptrack/dist/eoan/uptrack.deb
apt install python3-pycurl libgtk2-perl dbus-x11 libglade2-0 libpython-stdlib libpython2.7-minimal libpython2.7-stdlib python python-cairo python-dbus python-gi python-glade2 python-gobject-2 python-gtk2 python-minimal python-pycurl python-yaml python2.7 python2.7-minimal  -y
dpkg -i uptrack.deb
uptrack-upgrade -y
read -p "Done, press any key to return to main menu"
main_menu
}

main_menu () {
	cmd=(dialog --nocancel --menu "Welcome in setup-lxd-mm!" 22 76 16)
	options=(
		1 "Pre-reboot script"
		2 "Post-reboot script"
		3 "Install uptrack-upgrade"
	)

	choices=$("${cmd[@]}" "${options[@]}" 2>&1 >/dev/tty)

	for choice in $choices
	do
	case $choice in

        1)
		pre_reboot_script
	;;

        2)
		post_reboot_script
	;;

	3)
		install_uptrack
	;;

	esac
	done
	clear
}

main_menu