/****************************************************************************** * * Copyright(c) 2015 - 2017 Realtek Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * *****************************************************************************/ #ifndef _RTL8822B_HAL_H_ #define _RTL8822B_HAL_H_ #include /* BIT(x) */ #include /* PADAPTER */ #include "../hal/halmac/halmac_api.h" /* MAC REG definition */ #ifdef CONFIG_SUPPORT_TRX_SHARED #define MAX_RECVBUF_SZ 46080 /* 45KB, TX: (256-64)KB */ #else /* !CONFIG_SUPPORT_TRX_SHARED */ #define MAX_RECVBUF_SZ 24576 /* 24KB, TX: 256KB */ #endif /* !CONFIG_SUPPORT_TRX_SHARED */ /* * MAC Register definition */ #define REG_AFE_XTAL_CTRL REG_AFE_CTRL1_8822B /* hal_com.c & phydm */ #define REG_AFE_PLL_CTRL REG_AFE_CTRL2_8822B /* hal_com.c & phydm */ #define REG_MAC_PHY_CTRL REG_AFE_CTRL3_8822B /* phydm only */ #define REG_LEDCFG0 REG_LED_CFG_8822B /* rtw_mp.c */ #define MSR (REG_CR_8822B + 2) /* rtw_mp.c & hal_com.c */ #define MSR1 REG_CR_EXT_8822B /* rtw_mp.c & hal_com.c */ #define REG_C2HEVT_MSG_NORMAL 0x1A0 /* hal_com.c */ #define REG_C2HEVT_CLEAR 0x1AF /* hal_com.c */ #define REG_BCN_CTRL_1 REG_BCN_CTRL_CLINT0_8822B /* hal_com.c */ #define REG_WOWLAN_WAKE_REASON 0x01C7 /* hal_com.c */ #define REG_GPIO_PIN_CTRL_2 REG_GPIO_EXT_CTRL_8822B /* hal_com.c */ /* RXERR_RPT, for rtw_mp.c */ #define RXERR_TYPE_OFDM_PPDU 0 #define RXERR_TYPE_OFDM_FALSE_ALARM 2 #define RXERR_TYPE_OFDM_MPDU_OK 0 #define RXERR_TYPE_OFDM_MPDU_FAIL 1 #define RXERR_TYPE_CCK_PPDU 3 #define RXERR_TYPE_CCK_FALSE_ALARM 5 #define RXERR_TYPE_CCK_MPDU_OK 3 #define RXERR_TYPE_CCK_MPDU_FAIL 4 #define RXERR_TYPE_HT_PPDU 8 #define RXERR_TYPE_HT_FALSE_ALARM 9 #define RXERR_TYPE_HT_MPDU_TOTAL 6 #define RXERR_TYPE_HT_MPDU_OK 6 #define RXERR_TYPE_HT_MPDU_FAIL 7 #define RXERR_TYPE_RX_FULL_DROP 10 #define RXERR_COUNTER_MASK BIT_MASK_RPT_COUNTER_8822B #define RXERR_RPT_RST BIT_RXERR_RPT_RST_8822B #define _RXERR_RPT_SEL(type) (BIT_RXERR_RPT_SEL_V1_3_0_8822B(type) \ | ((type & 0x10) ? BIT_RXERR_RPT_SEL_V1_4_8822B : 0)) /* * BB Register definition */ #define rPMAC_Reset 0x100 /* hal_mp.c */ #define rFPGA0_RFMOD 0x800 #define rFPGA0_TxInfo 0x804 #define rOFDMCCKEN_Jaguar 0x808 /* hal_mp.c */ #define rFPGA0_TxGainStage 0x80C /* phydm only */ #define rFPGA0_XA_HSSIParameter1 0x820 /* hal_mp.c */ #define rFPGA0_XA_HSSIParameter2 0x824 /* hal_mp.c */ #define rFPGA0_XB_HSSIParameter1 0x828 /* hal_mp.c */ #define rFPGA0_XB_HSSIParameter2 0x82C /* hal_mp.c */ #define rTxAGC_B_Rate18_06 0x830 #define rTxAGC_B_Rate54_24 0x834 #define rTxAGC_B_CCK1_55_Mcs32 0x838 #define rCCAonSec_Jaguar 0x838 /* hal_mp.c */ #define rTxAGC_B_Mcs03_Mcs00 0x83C #define rTxAGC_B_Mcs07_Mcs04 0x848 #define rTxAGC_B_Mcs11_Mcs08 0x84C #define rFPGA0_XA_RFInterfaceOE 0x860 #define rFPGA0_XB_RFInterfaceOE 0x864 #define rTxAGC_B_Mcs15_Mcs12 0x868 #define rTxAGC_B_CCK11_A_CCK2_11 0x86C #define rFPGA0_XAB_RFInterfaceSW 0x870 #define rFPGA0_XAB_RFParameter 0x878 #define rFPGA0_AnalogParameter4 0x88C /* hal_mp.c & phydm */ #define rFPGA0_XB_LSSIReadBack 0x8A4 /* phydm */ #define rHSSIRead_Jaguar 0x8B0 /* RF read addr (rtl8822b_phy.c) */ #define rC_TxScale_Jaguar2 0x181C /* Pah_C TX scaling factor (hal_mp.c) */ #define rC_IGI_Jaguar2 0x1850 /* Initial Gain for path-C (hal_mp.c) */ #define rFPGA1_TxInfo 0x90C /* hal_mp.c */ #define rSingleTone_ContTx_Jaguar 0x914 /* hal_mp.c */ /* TX BeamForming */ #define REG_BB_TX_PATH_SEL_1_8822B 0x93C /* rtl8822b_phy.c */ #define REG_BB_TX_PATH_SEL_2_8822B 0x940 /* rtl8822b_phy.c */ /* TX BeamForming */ #define REG_BB_TXBF_ANT_SET_BF1_8822B 0x19AC /* rtl8822b_phy.c */ #define REG_BB_TXBF_ANT_SET_BF0_8822B 0x19B4 /* rtl8822b_phy.c */ #define rCCK0_System 0xA00 #define rCCK0_AFESetting 0xA04 #define rCCK0_DSPParameter2 0xA1C #define rCCK0_TxFilter1 0xA20 #define rCCK0_TxFilter2 0xA24 #define rCCK0_DebugPort 0xA28 #define rCCK0_FalseAlarmReport 0xA2C #define rD_TxScale_Jaguar2 0x1A1C /* Path_D TX scaling factor (hal_mp.c) */ #define rD_IGI_Jaguar2 0x1A50 /* Initial Gain for path-D (hal_mp.c) */ #define rOFDM0_TRxPathEnable 0xC04 #define rOFDM0_TRMuxPar 0xC08 #define rA_TxScale_Jaguar 0xC1C /* Pah_A TX scaling factor (hal_mp.c) */ #define rOFDM0_RxDetector1 0xC30 /* rtw_mp.c */ #define rOFDM0_ECCAThreshold 0xC4C /* phydm only */ #define rOFDM0_XAAGCCore1 0xC50 /* phydm only */ #define rA_IGI_Jaguar 0xC50 /* Initial Gain for path-A (hal_mp.c) */ #define rOFDM0_XBAGCCore1 0xC58 /* phydm only */ #define rOFDM0_XATxIQImbalance 0xC80 /* phydm only */ #define rA_LSSIWrite_Jaguar 0xC90 /* RF write addr, LSSI Parameter (rtl8822b_phy.c) */ #define rOFDM1_LSTF 0xD00 #define rOFDM1_TRxPathEnable 0xD04 /* hal_mp.c */ #define rA_PIRead_Jaguar 0xD04 /* RF readback with PI (rtl8822b_phy.c) */ #define rA_SIRead_Jaguar 0xD08 /* RF readback with SI (rtl8822b_phy.c) */ #define rB_PIRead_Jaguar 0xD44 /* RF readback with PI (rtl8822b_phy.c) */ #define rB_SIRead_Jaguar 0xD48 /* RF readback with SI (rtl8822b_phy.c) */ #define rTxAGC_A_Rate18_06 0xE00 #define rTxAGC_A_Rate54_24 0xE04 #define rTxAGC_A_CCK1_Mcs32 0xE08 #define rTxAGC_A_Mcs03_Mcs00 0xE10 #define rTxAGC_A_Mcs07_Mcs04 0xE14 #define rTxAGC_A_Mcs11_Mcs08 0xE18 #define rTxAGC_A_Mcs15_Mcs12 0xE1C #define rB_TxScale_Jaguar 0xE1C /* Path_B TX scaling factor (hal_mp.c) */ #define rB_IGI_Jaguar 0xE50 /* Initial Gain for path-B (hal_mp.c) */ #define rB_LSSIWrite_Jaguar 0xE90 /* RF write addr, LSSI Parameter (rtl8822b_phy.c) */ /* RFE */ #define rA_RFE_Pinmux_Jaguar 0xCB0 /* hal_mp.c */ #define rB_RFE_Pinmux_Jaguar 0xEB0 /* Path_B RFE control pinmux */ #define rA_RFE_Inv_Jaguar 0xCB4 /* Path_A RFE cotrol */ #define rB_RFE_Inv_Jaguar 0xEB4 /* Path_B RFE control */ #define rA_RFE_Jaguar 0xCB8 /* Path_A RFE cotrol */ #define rB_RFE_Jaguar 0xEB8 /* Path_B RFE control */ #define rA_RFE_Inverse_Jaguar 0xCBC /* Path_A RFE control inverse */ #define rB_RFE_Inverse_Jaguar 0xEBC /* Path_B RFE control inverse */ #define r_ANTSEL_SW_Jaguar 0x900 /* ANTSEL SW Control */ #define bMask_RFEInv_Jaguar 0x3FF00000 #define bMask_AntselPathFollow_Jaguar 0x00030000 #define rC_RFE_Pinmux_Jaguar 0x18B4 /* Path_C RFE cotrol pinmux*/ #define rD_RFE_Pinmux_Jaguar 0x1AB4 /* Path_D RFE cotrol pinmux*/ #define rA_RFE_Sel_Jaguar2 0x1990 /* Page1(0x100) */ #define bBBResetB 0x100 /* Page8(0x800) */ #define bCCKEn 0x1000000 #define bOFDMEn 0x2000000 /* Reg 0x80C rFPGA0_TxGainStage */ #define bXBTxAGC 0xF00 #define bXCTxAGC 0xF000 #define bXDTxAGC 0xF0000 /* PageA(0xA00) */ #define bCCKBBMode 0x3 #define bCCKScramble 0x8 #define bCCKTxRate 0x3000 /* General */ #define bMaskByte0 0xFF /* mp, rtw_odm.c & phydm */ #define bMaskByte1 0xFF00 /* hal_mp.c & phydm */ #define bMaskByte2 0xFF0000 /* hal_mp.c & phydm */ #define bMaskByte3 0xFF000000 /* hal_mp.c & phydm */ #define bMaskHWord 0xFFFF0000 /* hal_com.c, rtw_mp.c */ #define bMaskLWord 0x0000FFFF /* mp, hal_com.c & phydm */ #define bMaskDWord 0xFFFFFFFF /* mp, hal, rtw_odm.c & phydm */ #define bEnable 0x1 /* hal_mp.c, rtw_mp.c */ #define bDisable 0x0 /* rtw_mp.c */ #define MAX_STALL_TIME 50 /* unit: us, hal_com_phycfg.c */ #define Rx_Smooth_Factor 20 /* phydm only */ /* * RF Register definition */ #define RF_AC 0x00 #define RF_AC_Jaguar 0x00 /* hal_mp.c */ #define RF_CHNLBW 0x18 /* rtl8822b_phy.c */ #define RF_ModeTableAddr 0x30 /* rtl8822b_phy.c */ #define RF_ModeTableData0 0x31 /* rtl8822b_phy.c */ #define RF_ModeTableData1 0x32 /* rtl8822b_phy.c */ #define RF_0x52 0x52 #define RF_WeLut_Jaguar 0xEF /* rtl8822b_phy.c */ /* General Functions */ void rtl8822b_init_hal_spec(PADAPTER); /* hal/hal_com.c */ #ifdef CONFIG_MP_INCLUDED /* MP Functions */ #include /* struct mp_priv */ void rtl8822b_prepare_mp_txdesc(PADAPTER, struct mp_priv *); /* rtw_mp.c */ void rtl8822b_mp_config_rfpath(PADAPTER); /* hal_mp.c */ #endif void hw_var_set_dl_rsvd_page(PADAPTER adapter, u8 mstatus); #ifdef CONFIG_USB_HCI #include #elif defined(CONFIG_SDIO_HCI) #include #elif defined(CONFIG_PCI_HCI) #include #endif #endif /* _RTL8822B_HAL_H_ */